blog · B2B PROCUREMENT

Silicone Print Cost per Piece: Layers, Moulds and Volume

By Weavnora · Updated

Apparel printing and decoration process used in Weavnora buyer guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Silicone print cost per piece is the charge for printing a raised, rubber-like silicone logo on one garment, driven by set-up, layers, height, logo size, colours and quantity. Silicone often needs 2-6 printed layers, a strike-off in 7-14 days and stretch and wash tests, so small runs cost more per piece. MOQ depends on style and fabric.

Silicone print cost per piece is the charge for printing a raised, rubber-like silicone logo on one garment, driven by set-up, layers, height, logo size, colours and quantity. Silicone often needs 2-6 printed layers, a strike-off in 7-14 days and stretch and wash tests, so small runs cost more per piece. MOQ depends on style and fabric.

Silicone logos look premium: sharp, raised, soft to the touch and available in gloss or matte. They also tend to cost more than standard screen prints, and buyers are often surprised by how much the price changes with size, height and quantity. The reason is simple. Silicone ink is more expensive than plastisol, each layer needs printing and curing, and the set-up has to be precise. This guide breaks down the drivers of silicone print cost per piece so you can compare quotes and design logos that hit your budget. We do not publish fixed prices, because rates vary by factory, region and job, but the drivers below apply everywhere.

What is silicone print cost per piece?

Silicone print cost per piece is the price a factory charges to apply a silicone logo to one garment, covering screens or moulds, silicone ink, printing and curing of each layer, labour, testing and overhead spread across the order. Silicone logos are usually 3-15 cm wide, built in 2-6 layers depending on height, and need a strike-off in 7-14 days before bulk pricing is confirmed.

How is silicone print cost built up?

Most factories build the quote from these parts:

  1. Set-up. Artwork preparation, screens with thick stencils or moulds, colour matching and machine set-up.
  2. Silicone ink. Base, colour and top-coat silicone, which costs more per gram than standard ink.
  3. Layers and curing. Each layer is printed and cured before the next, so taller logos take more passes.
  4. Labour. Loading, aligning, printing, flashing and unloading each garment or panel.
  5. Testing. Strike-offs, stretch tests, wash tests and adhesion checks.
  6. Overhead and margin. Equipment, energy, waste and profit.

Set-up is fixed per design and colour, so it weighs heavily on small orders. Our screen printing setup cost guide explains how set-up charges work generally.

Want a clear silicone print price? Weavnora quotes garment, print set-up and per-piece decoration as separate lines, so you can see how logo size, layers and quantity change silicone print cost. See our special printing page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Which factors raise or lower silicone print cost?

  • Logo size. Bigger logos use more ink and take longer to print and cure.
  • Height. A flat silicone print may need two layers; a tall 3D logo may need many more.
  • Colours. Each colour needs its own screen or mould step.
  • Finish. Gloss, matte or textured top coats can add a layer.
  • Garment type. Hoodies and sweatpants are thicker and slower to load than tees.
  • Placement. Sleeves, hoods and legs need special pallets and slow loading.
  • Quantity. Larger runs spread set-up over more pieces.

Direct silicone print vs silicone transfer vs high density: which option fits?

Selection criteriaDirect silicone printSilicone heat transferHigh density plastisol
Set-upScreens per colourTransfer production runThick-stencil screens
Best quantityMedium to large runsSmall to medium runs, many stylesMedium to large runs
Per-piece labourHigher, multiple layersLower, one pressMedium
HandfeelSoft, flexibleSoft, slightly film-like edgeFirm
Relative cost per pieceHigherMedium to higherMedium

The trade-offs are bond, flexibility and finish versus set-up, labour and volume. Direct printing gives the best bond and is efficient once set up. Transfers make sense when one logo goes on many garment styles. High density gives a similar raised look at a lower cost but with a firmer hand; see our high density print cost per piece guide.

Why does height affect the price so much?

Height is built layer by layer. Every extra layer means another print pass, another cure and more silicone. A logo that is 1 mm tall can take several times the press time of a flat silicone logo of the same size. If you want a premium feel at a lower cost, ask the factory for a low-profile silicone logo: it keeps the soft-touch finish but needs fewer layers.

How do garment type and placement change cost?

On tees, a left-chest silicone logo is fast to load and cure. On hoodies, thicker fleece needs longer cure times and careful handling around the hood and pocket. On sweatpants, logos are usually printed on cut panels before sewing, which is efficient but needs planning. Our silicone print hoodie manufacturer guide and silicone print t-shirt manufacturer guide explain process details by garment.

How can you reduce silicone print cost?

  1. Keep logos compact; small chest or thigh marks are most efficient.
  2. Use one or two colours instead of many.
  3. Choose a low-profile height unless 3D depth is essential.
  4. Use the same logo across several garment styles in one run.
  5. Consider transfers if the logo goes on many styles in small quantities.
  6. Re-order the same design so screens and settings are reused.

How does quantity change the price per piece?

At low quantities, screens, mould set-up, colour matching and strike-offs make up a large share of the price. As the order grows, these fixed costs are spread more thinly, and per-piece labour, ink and curing time become the main drivers. Splitting one design into many small colourway runs keeps set-up high, so it is usually cheaper to group colourways that share the same silicone colour into one production run. Re-orders also cost less when screens and approved settings are kept on file.

What should a silicone print quote include?

Ask for screen or mould charges, per-piece print price by quantity tier, number of layers and colours, the agreed height and finish, testing and strike-off costs, and whether the price covers application on panels or finished garments. Ask how the factory tests stretch and adhesion, because a failed test after bulk would cost far more than a proper strike-off. For the wider picture, see the apparel manufacturing cost and pricing guide.

Silicone print cost per piece: typical specs and key numbers

SpecTypical estimate range
Silicone logo width3-15 cm
Printed layers per logo2-6 layers
Strike-off time7-14 days
Suitable garment fabric180-450 GSM cotton jersey or fleece
Wash test before approval3-5 cycles
Bulk print time after approval7-15 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • Silicone print cost per piece covers set-up, silicone ink, layers, labour, testing and overhead.
  • Logo size, height, colours, garment type and quantity drive the price.
  • Height adds cost fastest because every layer needs printing and curing.
  • Direct print suits medium to large runs; transfers suit many styles in small runs.
  • Compact, low-profile logos with few colours keep silicone affordable.

Request a silicone print quote

Want a costed silicone logo quote? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

Why is silicone print more expensive than screen print?

Silicone ink costs more and logos need several printed and cured layers.

Is a silicone transfer cheaper?

It can be for small runs across many styles; direct print is usually better value at volume.

Does a taller logo cost more?

Yes. More height means more layers, ink and press time.

Can I get one logo on tees and hoodies in one order?

Yes. Sharing set-up across styles helps reduce cost per piece.

What is the MOQ for silicone printing?

MOQ depends on style and fabric, so we confirm it in your quote.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.