blog · B2B PROCUREMENT
High Density Print Cost per Piece: Layers, Screens, Size
By Weavnora · Updated

Direct answer
What buyers need to know
High density print cost per piece is the charge for screen printing thick, sharp-edged raised ink onto a garment, driven by screen preparation, layers, print size, colours and order size. Most high density prints use 1-4 colours on areas 5-30 cm wide, need a strike-off in 7-12 days and print slower than flat plastisol. MOQ depends on style and fabric.
High density print cost per piece is the charge for screen printing thick, sharp-edged raised ink onto a garment, driven by screen preparation, layers, print size, colours and order size. Most high density prints use 1-4 colours on areas 5-30 cm wide, need a strike-off in 7-12 days and print slower than flat plastisol. MOQ depends on style and fabric.
High density printing gives logos and graphics a crisp, raised, almost moulded look. Edges stand up sharply from the fabric, small details stay defined and the print catches light from every angle. It is a favourite for streetwear wordmarks, chest logos and premium merch. Buyers often expect it to cost the same as a normal screen print, but high density needs thicker screens, more ink, slower press speeds and careful curing. This guide explains what drives high density print cost per piece and how to plan designs that look great without overspending. We do not publish fixed prices, because rates vary by factory, region and job, but the drivers below apply everywhere.
What is high density print cost per piece?
High density print cost per piece is the price a factory charges to print one garment with high density plastisol, a thick ink laid through specially prepared screens in one or more passes to build sharp, vertical raised edges, covering screen and film preparation, ink, press labour, flash curing between layers, final curing, testing and inspection. A typical job uses 1-4 colours on a print area about 5-30 cm wide and needs a strike-off in 7-12 days.
How is high density print cost calculated?
Most factories build the price from these parts:
- Screen and film preparation. High density needs thick emulsion or capillary film, often 200-400 microns, so stencils take longer to make and cost more than standard screens.
- Ink. High density plastisol is used in much greater volume per print than flat ink.
- Press labour. Thick ink is printed more slowly, often with multiple strokes or passes.
- Flash curing. Multi-layer prints are flashed between passes to set each layer.
- Final curing. Thick deposits need longer dwell time in the dryer to cure through.
- Testing and inspection. Strike-offs, wash tests and checks on edge sharpness.
- Overhead and margin. Utilities, waste, management and profit.
Want a clear raised-print price? Weavnora quotes garments, print set-up and per-piece print costs as separate lines, so you can see how layers, size and quantity change the price of high density printing. See our special printing page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
Which factors raise or lower high density print cost?
- Print area. Ink use rises quickly with size, and large raised areas also slow curing.
- Number of colours. Each colour needs its own thick screen and station.
- Height and layers. Taller prints need more passes and flashes.
- Detail level. Very fine details need precise screens and slower printing.
- Garment type. Hoodies and sweatshirts are thicker to load and cure than tees.
- Combined effects. High density combined with flat colours, gloss or puff needs extra screens.
- Quantity. Set-up costs are spread over more pieces on larger runs.
High density vs puff vs flat plastisol: which option fits?
| Selection criteria | High density | Puff print | Flat plastisol |
|---|---|---|---|
| Edge look | Sharp, vertical | Rounded, soft | Flat |
| Screen preparation | Thick stencil | Standard to medium | Standard |
| Ink use per print | High | Medium | Low to medium |
| Press speed | Slower | Medium | Fast |
| Handfeel | Firm, smooth | Spongy | Smooth layer |
| Relative cost per piece | Higher | Medium | Lower |
The trade-offs are visual impact versus cost and comfort. High density looks the sharpest and most premium, but uses more ink and press time. Puff gives a softer raised effect at moderate cost, and flat plastisol is the most economical. Our puff print cost per piece guide explains puff pricing in detail.
Why do layers and height matter so much?
A single high density pass can create a noticeable raised edge, but many brands want taller, more sculpted prints. Each extra layer means another pass, another flash cure and more ink. Height also affects comfort: tall, large prints on a hoodie chest feel stiff and heavy. As a rule, use height where it matters, such as a logo or key word, and keep surrounding elements flat. This gives a strong effect at lower cost.
How do garment type and fabric affect price?
High density prints best on smooth, stable fabrics such as 240-400 GSM cotton jersey or fleece. Heavier hoodies take longer to load, need careful platen adhesion and require longer curing, so they usually cost more per print than tees. Garment-dyed or washed items can be printed, but adhesion must be tested because softeners can interfere. Our high density print t-shirt manufacturer guide and high density print hoodie manufacturer guide explain garment choices.
How do quantity and set-up affect the price per piece?
Screens, film and strike-offs are fixed costs, so they weigh heavily on small runs. On larger runs, per-piece labour, ink and curing become the main costs. Re-orders are cheaper when screens are stored and reused. Printing several colourways of one design in a single run also helps. Our screen printing setup cost guide explains set-up charges in detail.
How can you reduce high density print cost?
- Limit high density to the key logo or text, with other elements flat.
- Keep raised areas compact rather than large solid blocks.
- Use one or two colours for the raised parts.
- Avoid extreme heights unless they are central to the design.
- Combine colourways and re-order the same design.
- Supply clean vector artwork with separate layers for raised and flat elements.
What should you test before bulk?
Ask for a strike-off on the actual garment and colour. Check edge sharpness, height, colour, flexibility and wash durability after five to ten washes. High density prints that are under-cured can crack or lose edge definition, so ask how the factory confirms full cure. Our high density print wash crack protocol describes how cracking is tested.
What should a high density print quote include?
Look for screen and film charges, the per-piece print price by quantity tier, number of colours and layers, print size and location, strike-off cost and timing, and whether garments are supplied by the factory. When comparing quotes, confirm that stencil thickness and number of layers are the same, because a thinner stencil gives a lower price but a flatter result. For the full cost picture, see our apparel manufacturing cost and pricing guide.
High density print cost per piece: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Colours per high density design | 1-4 colours |
| Typical print width | 5-30 cm |
| Suitable garment fabric | 240-400 GSM |
| Strike-off time | 7-12 days |
| Wash test before approval | 5-10 washes |
| Bulk print time after approval | 7-15 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- High density print cost per piece covers thick screens, extra ink, slower printing, flash and final curing and testing.
- Print area, colours, layers, detail and garment type drive the price.
- High density costs more than puff and flat plastisol but gives the sharpest raised look.
- Use height only on key elements to control cost and comfort.
- Compare quotes on stencil thickness and layers, not just price.
Request a high density print quote
Want a costed high density print quote? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What is high density printing?
It is a screen printing method using thick ink and special screens to create sharp, raised edges.
Why does high density cost more than normal screen print?
It needs thicker stencils, more ink, slower printing and longer curing.
Is high density more expensive than puff print?
Usually, because it uses more ink and press time for sharper edges.
Can high density be printed on hoodies?
Yes. It works well on smooth fleece, though hoodies take longer to print and cure than tees.
What is the MOQ for high density printing?
MOQ depends on style and fabric, so we confirm it in your quote.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.