blog · B2B PROCUREMENT

How to Find a Screen Printing Clothing Manufacturer

By Weavnora · Updated

Apparel printing and decoration process used in Weavnora buyer guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

How to find a screen printing clothing manufacturer: decide between a full-package factory and a print shop, shortlist suppliers that print on their own garments, then test inks, registration and wash durability. As a typical estimate, plan 1-2 strike-off rounds of 5-10 days, 1-6 colours per design and 30-50 days for bulk. MOQ depends on style and fabric.

How to find a screen printing clothing manufacturer: decide between a full-package factory and a print shop, shortlist suppliers that print on their own garments, then test inks, registration and wash durability. As a typical estimate, plan 1-2 strike-off rounds of 5-10 days, 1-6 colours per design and 30-50 days for bulk. MOQ depends on style and fabric.

Screen printing is still the workhorse of branded apparel. It is durable, vivid, cost-efficient at volume and works with soft water-based inks, bold plastisol, discharge, puff and specialty effects. The question for many brands is who should do it. If one company makes the garment and another prints it, quality problems bounce between them. Learning how to find a screen printing clothing manufacturer means finding a partner that takes responsibility for both. This guide compares supplier types, lists the tests that matter, and lays out a scorecard and a pilot plan.

What does it mean to find a screen printing clothing manufacturer?

To find a screen printing clothing manufacturer is to identify and vet a supplier that both produces the garments, such as tees, hoodies and sweatpants, and screen prints your artwork on them, controlling ink choice, mesh, registration and curing so prints stay sharp and durable through bulk and washing. It differs from hiring a print shop that decorates stock blanks. Typical designs use 1-6 ink colours, and as a typical industry estimate a cured print should survive 20-30 home washes without major cracking.

How to find a screen printing clothing manufacturer: choose the supplier model

There are three common models:

Supplier modelWhat they doStrengthWeakness
Full-package factory with in-house printMakes garments and prints themOne responsible party, custom blanksNeeds sampling time
Factory plus partner print houseMakes garments, prints at a partnerAccess to specialist printsControl depends on the partnership
Print shop on stock blanksPrints on purchased blanksVery fast, small runsNo control of fabric, fit or labels

Brands building their own product, with custom fit, fabric and labels, usually need the first or second model. Our cut and sew vs blank customization guide explains that choice in depth.

Want garments and prints from one partner? Weavnora makes heavyweight tees, hoodies and sweatpants and screen prints them in-house or with controlled partners, approving each design on a strike-off before bulk. See our screen printing page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Where should you search?

  1. Garment factories that show printed product in their own catalogue, not only blanks.
  2. Search by print technique such as discharge, puff or water-based, because specialists show their work. Our discharge print t-shirt manufacturer guide shows what to look for.
  3. Trade shows and sourcing platforms, filtered by "screen printing" and "cut and sew".
  4. Referrals from brands whose printed garments you admire.

Shortlist three to five suppliers, then test.

Which questions reveal print capability?

  • Do you print in-house? If not, who prints and how is quality controlled?
  • Which inks do you run: plastisol, water-based, discharge, puff, high density?
  • What mesh counts and how many colours can your presses handle?
  • How do you check curing, and what dryer temperature and belt speed do you use?
  • What wash and crack tests do you run on prints?
  • Can you print on garment-dyed or washed garments, and before or after washing?

Our screen print mesh count approval guide explains why mesh choice affects detail and ink deposit.

Water-based vs plastisol ink: which option fits your brand?

Selection criteriaWater-based or discharge inkPlastisol ink
HandfeelSoft, in the fabricSlightly raised, on the fabric
Colour vibrancy on dark fabricGood with discharge, softerVery bright and opaque
DetailExcellent on fine linesVery good
Fabric compatibilityBest on high cottonWorks on most fabrics
Curing sensitivityHigher, needs full cureMore forgiving
Best forPremium and vintage teesBold merch, streetwear graphics

The trade-offs are softness and a vintage feel against brightness and process tolerance. A good manufacturer will recommend an ink per design rather than one ink for everything. Our DTG vs screen print guide adds another option for detailed artwork.

How do you test print quality?

Request strike-offs, which are test prints on your real garment and colour, then score them:

TestWhat to check
RegistrationColours line up within about 0.5-1 mm
OpacityEven coverage, no fabric showing through
Edge sharpnessClean edges, no blur or bleed
HandfeelMatches the ink choice you approved
Wash durabilityNo major cracking or fading after 5-10 test washes
Stretch testPrint stretches without cracking

Ask for the strike-off to be washed before you approve. Prints that look perfect fresh can crack after washing if they are under-cured. Our screen printing setup cost guide explains how screens and colours affect cost.

How should print placement be specified?

Many disputes come from placement, not print quality. Specify each print with its width and its distance from a fixed point, usually the high point shoulder or the neck seam. A typical adult front print is 25-30 cm wide and sits 7-10 cm below the neck seam; a left chest logo is 8-10 cm wide. Agree a placement tolerance and check it across the size run, because one screen size on XS and XXL looks very different. Garment-dyed tees can shrink 3-5% before printing, so confirm whether prints go on before or after the wash.

What red flags should you avoid?

  • Will not show printed garments after washing.
  • No answer on curing temperature or method.
  • Every design quoted with the same ink regardless of fabric or look.
  • No print placement tolerance in the specification.
  • Pressure to skip strike-offs to save time.

How should the first order be run?

Start with two or three designs, a limited colour count and garments the factory considers practical. Approve washed strike-offs and a sealed sample, agree print placement tolerances, and inspect prints before packing. When the pilot is right, scale designs and colourways. For the full search process, see our how to find a clothing manufacturer guide and our how to find a t-shirt manufacturer guide.

How to find a screen printing clothing manufacturer: typical specs and key numbers

SpecTypical estimate range
Ink colours per design1-6 colours
Registration tolerance0.5-1 mm
Print survival target20-30 washes
Strike-off lead time per round5-10 days
Tee fabric weight180-300 GSM
Front print width, adult sizes25-30 cm
Chest print below neck seam7-10 cm
Garment shrinkage before printing3-5%
Bulk production after approval30-50 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • To find a screen printing clothing manufacturer, look for one party responsible for garment and print.
  • Full-package factories suit brands with custom fit, fabric and labels.
  • Ask about inks, mesh counts, curing and wash testing.
  • Approve washed strike-offs, scored for registration, opacity, edges and durability.
  • Run a pilot with a few designs before scaling.

Request a screen printing sample and quote

Ready to test a screen printed program? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What is the difference between a screen print manufacturer and a print shop?

A manufacturer makes and prints the garments; a print shop decorates purchased blanks.

Which ink is best for soft prints?

Water-based or discharge inks give the softest hand on high cotton garments.

Why should strike-offs be washed before approval?

Under-cured prints can crack after washing even if they look perfect fresh.

How many colours can a screen print have?

Most designs use 1-6 colours; more is possible but increases setup and cost.

What is the MOQ for screen printed clothing?

MOQ depends on style, fabric and colours. Send your references and quantities through a quote request.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.