oem-odm · B2B PROCUREMENT

Burnout T-Shirt Manufacturer: Devore Pattern Tee Guide

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Burnout t-shirt manufacturer means a factory that makes tees with devore patterns, where a chemical paste removes cotton from cotton-polyester jersey and leaves a sheer design. Typical programs use 120-200 GSM blended jersey, 7-14 days for strike-offs and 25-40 days for bulk after approval. MOQ depends on style and fabric.

Burnout t-shirt manufacturer means a factory that makes tees with devore patterns, where a chemical paste removes cotton from cotton-polyester jersey and leaves a sheer design. Typical programs use 120-200 GSM blended jersey, 7-14 days for strike-offs and 25-40 days for bulk after approval. MOQ depends on style and fabric.

Burnout tees have a distinctive look: a soft, slightly sheer pattern that appears to float inside the fabric. They are popular in vintage-style, boho and music-inspired collections, and they pair well with a washed finish. The process is also easy to misunderstand. Burnout does not work on 100% cotton, it needs a blend with a fibre that survives the chemical, and it changes the feel and strength of the fabric where the pattern sits. A burnout t-shirt manufacturer that knows the chemistry will tell you early which blend, weight and artwork will give a clean pattern instead of holes, stiffness or a ghosted outline.

What is a burnout t-shirt manufacturer?

A burnout t-shirt manufacturer is a garment factory that produces tees on which part of the fabric is chemically removed to leave a sheer, textured pattern, also called devore. The paste dissolves cotton fibres in a cotton-polyester blend while the polyester remains, so the design appears translucent against the denser body. Most burnout tees use 120-200 GSM blended jersey, lighter than heavyweight cotton tees.

Which fabrics can be burnout printed?

Burnout needs a fabric made from two different fibres, usually cotton with polyester, or cotton with a cellulose-resistant yarn core. The paste attacks the cotton and leaves the polyester behind. Common blends are 50/50 and 60/40 cotton-polyester slub or jersey, and some factories use core-spun yarns that keep a polyester spine inside each cotton strand. Weight matters: very light jersey becomes too sheer and fragile after burnout, while very dense fabric needs longer, harsher treatment. Pure heavyweight cotton tees cannot be burned out, so if your range is built on 240-300 GSM cotton, plan burnout as a separate lighter style or use a related look such as discharge or tonal printing. Our discharge print t-shirt manufacturer guide explains the closest cotton-friendly alternative.

Planning a translucent pattern tee? Weavnora works on heavyweight and washed tees and can advise whether burnout, discharge or another special print gives the look you want on your chosen fabric. See our special printing page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Burnout vs discharge vs tonal print: which option fits?

Selection criteriaBurnout (devore)Discharge printTonal print
Fabric neededCotton-polyester blendReactive-dyed cottonMost cotton jersey
Visual effectSheer, translucent patternSoft faded pattern, colour removedSubtle same-colour graphic
Hand feelThinner and softer in pattern areaVery softSoft to slightly raised
Fabric strength in designReducedNormalNormal
Heavyweight suitabilityLimitedGoodGood
Best forVintage, boho, music teesSoft vintage graphicsMinimal logo tees

The trade-offs are look against strength and fabric choice. Burnout gives an effect no ink can copy, but the pattern area is weaker and the blend limits your fabric options. Discharge works on heavyweight cotton and keeps strength, though it only lightens the dyed colour rather than creating transparency. Tonal prints are the safest for bulk, yet they lack the sheer depth. Many brands choose burnout for a small accent range and keep core heavyweight tees on cotton-friendly decoration.

How should burnout artwork be prepared?

Use bold shapes, medium line weights and clear separation between areas. Hairlines may break through and leave holes, and very small isolated shapes can look like noise. Send vector artwork at print size and mark which areas are burned out and which stay solid. Keep patterns at least 3-5 mm away from seams, necklines and hems, because chemical paste near stitching can weaken thread bonds or soften the edge. Large all-over burnout is possible but needs careful handling, since the whole panel loses strength. Repeat patterns need registration marks so the repeat does not drift across panels. See the artwork file handoff checklist for the file formats a factory expects.

How does burnout change fit, feel and wash behaviour?

After burnout the fabric is washed to remove residue, which makes the pattern softer and often more translucent. Shrinkage can differ between burned and unburned areas, so a pattern block near the hem can cause slight twisting if it is poorly placed. Garment washing after burnout is gentler than for heavy cotton, because aggressive enzyme or stone wash can open up the pattern edges and create holes. Ask for a post-wash sample and a few home-wash cycles before approval. The vintage wash t-shirt cost per piece page explains how wash choices change cost and timing.

How do you sample and approve a burnout tee?

Request a strike-off on your actual blend, because a pattern that looks right on one slub jersey can behave very differently on another. Check pattern depth, edge sharpness, any holes, hand feel and colour of the remaining fibre. Wash the sample three to five times and compare. Approve one sealed sample, and note the allowed variation in sheerness between pieces, since burnout depth varies slightly by lot. Ask the factory to record paste type, dwell time and wash settings so bulk can match.

What should be checked in bulk?

Inspect pieces from the start, middle and end of each run for pattern placement, even depth, holes and residue smell. Check seam strength near burned areas and compare shade against the sealed sample. For a wider range, the custom t-shirt manufacturing guide shows where special effects fit into development and bulk, and the tonal print t-shirt manufacturer guide covers a quieter graphic option.

Which brands should consider burnout, and which should skip it?

Burnout suits brands whose customers want a soft, fashion-led tee with visual depth: vintage-inspired labels, music and festival merch, boho collections and layered looks where the pattern shows skin or a contrasting base. It is a poor fit for brands whose identity depends on a thick, rugged heavyweight cotton hand, for workwear lines that need maximum seam strength, and for programs that need very tight shade matching across many lots. A practical compromise is a small burnout capsule alongside your core heavyweight tees. Treat the capsule as a separate style with its own fabric, wash and care label, and test small before you commit larger quantities. Tell your supplier how the tee will be worn and washed, because a soft pattern that looks right on a model photo can fray at the edge if customers wash it hot or tumble it hard. Care labels should recommend cold washing and low heat drying for burnout styles.

Burnout t-shirt manufacturer: typical specs and key numbers

SpecTypical estimate range
Blended jersey fabric weight120-200 GSM
Cotton content in blend40-60%
Pattern distance from seams3-5 mm
Artwork resolution at print size300 dpi or more
Strike-off time7-14 days
Wash test before approval3-5 washes
Bulk production after approval25-40 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • A burnout t-shirt manufacturer removes cotton from a cotton-polyester blend to create a sheer devore pattern.
  • Pure heavyweight cotton cannot be burned out; discharge or tonal print are the cotton-friendly alternatives.
  • Use bold shapes and keep patterns away from seams and hems.
  • Gentle washing protects pattern edges and prevents holes.
  • Approve a washed strike-off on your real blend and inspect bulk against it.

Request a burnout t-shirt quote

Ready to test your devore pattern? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

Can 100% cotton tees be burnout printed?

No, burnout needs a blend such as cotton-polyester so the paste can remove one fibre.

Is burnout the same as discharge?

No, burnout makes the fabric sheer while discharge removes dye colour.

Will burnout tees feel heavy?

No, burnout tees are usually lighter and softer than heavyweight cotton tees.

Can burnout be combined with garment washing?

Yes, but gentle washing is advised to avoid opening the pattern.

What is the MOQ for burnout tees?

MOQ depends on style and fabric, so we confirm it in your quote.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.