oem-odm · B2B PROCUREMENT

Two-Way Zip Hoodie Manufacturer: Double Slider Zip Guide

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Two-way zip hoodie manufacturer means a factory that sews full zip hoodies with a double slider zipper, so the wearer can open the zip from the top or the bottom. Typical programs use 300-450 GSM fleece, 55-75 cm zips graded by size, 10-15 days for samples and 35-50 days for bulk. MOQ depends on style and fabric.

Two-way zip hoodie manufacturer means a factory that sews full zip hoodies with a double slider zipper, so the wearer can open the zip from the top or the bottom. Typical programs use 300-450 GSM fleece, 55-75 cm zips graded by size, 10-15 days for samples and 35-50 days for bulk. MOQ depends on style and fabric.

A standard zip hoodie opens only from the top. A two-way zip hoodie adds a second slider at the bottom of the zipper so the wearer can open the hem while keeping the chest closed. It sounds like a small change, but customers notice it when they sit, drive, cycle or layer the hoodie over a longer tee, and it gives the garment a more technical, premium feel. It also brings new decisions about zipper type, zip length, slider design and placket construction. A two-way zip hoodie manufacturer that has worked with double slider zips will help you avoid wavy plackets, stiff hems and sliders that separate unexpectedly.

What is a two-way zip hoodie manufacturer?

A two-way zip hoodie manufacturer is a garment factory that produces full zip hoodies fitted with a two-way separating zipper, which has two sliders on one chain so the front can be opened from the neck down or from the hem up. The design adds comfort when sitting and a more premium look. Most two-way zip hoodies use 300-450 GSM fleece and 55-75 cm zips graded by size.

How does a two-way zipper work?

A two-way separating zipper has one chain, one pin and box at the bottom, and two sliders facing each other. The top slider closes the zip from the hem upwards as usual. The lower slider can be pulled up to open the bottom section. When both sliders meet at the bottom, the zip can be separated like a normal jacket zip. Pullers can be identical, or the lower one can be smaller so the wearer knows which is which. Locking sliders stop the zip from creeping open.

Upgrading your zip hoodie? Weavnora produces heavyweight zip hoodies and can sample two-way metal or coil zippers on your chosen fleece and colours. See our heavyweight hoodies page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Two-way zip vs one-way zip vs pullover: which option fits?

Selection criteriaTwo-way zip hoodieOne-way zip hoodiePullover hoodie
Wearer comfort when seatedBestGoodFixed
Styling optionsMost, open top or bottomOpen or closedOne look
Trim costHighestMediumLowest
Construction stepsMostMediumFewest
Quality risksSlider separation, waving placketWaving placketLow
Best forPremium and technical hoodiesEveryday zip hoodiesCore basics, merch

The trade-offs are comfort and perceived quality against cost and complexity. A two-way zip makes the hoodie more versatile and premium, but zippers cost more and need careful installation. A one-way zip is cheaper and familiar, while a pullover remains the simplest and best value for merch. The half zip hoodie manufacturer guide and the hoodie zipper cost per piece guide explain related options.

Which zipper type should you choose?

Metal zips in brass, nickel or gunmetal give a heavy, premium look and suit 380-450 GSM fleece. Moulded plastic zips are lighter and durable. Nylon coil zips are flexible, lie flatter on curves and suit lighter fleece. Tooth size matters: a size 5 zip is common for hoodies, while size 8 gives a bolder, workwear look. Specify tape colour, puller style, locking or non-locking sliders and any branded pullers. Ask for zip pull strength and wash compatibility.

How should zip length be graded?

Zip length follows centre front length, so it must grade by size, usually in steps of 2-3 cm. Typical lengths run around 55-75 cm across a size range. If one zip length is used for several sizes, the placket will wave or pull. Mark zip length per size in the tech pack and confirm it on a size set sample. Shrinkage matters too: if the hoodie is garment washed after sewing, fleece shrinks around 3-6% in length while the zip does not, which causes waving. Many factories wash fleece before cutting or choose a zip that matches the wash route.

How should the placket be built?

Heavy fleece stretches along the front edge, so the placket is stabilised with interfacing or tape. A zip garage at the neck covers the top stop, and an inside placket or facing protects skin and hides the zip tape. Topstitching should be straight and even on both sides. Check that the left and right fronts line up at the chest seam, pocket opening and hem when the zip is closed.

How do you sample and approve?

Start with a fit sample using the real zipper, then a pre-production sample in final colour, wash and decoration. Open and close both sliders many times, sit in the hoodie, wash it three to five times and check flatness, slider function and shade between zip tape and fleece. The French terry vs fleece hoodie fabric guide helps you choose the body fabric.

What should be checked in bulk?

Test zip function on every piece, measure zip length by size, check placket waving and alignment, and confirm slider locking. The custom hoodie and sweatshirt manufacturing guide shows where trim approvals sit in the overall timeline.

Which brands should choose a two-way zip?

Two-way zips suit premium basics brands, streetwear labels with a technical edge, outdoor lifestyle brands and companies that want a corporate hoodie that feels a step above standard merch. They are less suited to low-cost event merch or programs that need the fastest possible turnaround. If you are unsure, sample a two-way and a one-way zip side by side and ask a few customers which they prefer before you commit to bulk.

How do pockets and decoration fit around a two-way zip?

The zip divides the front into two panels, so kangaroo pockets become split pockets or side seam pockets, and front prints or embroidery must be placed on the left or right chest or across the back. Split pouch pockets should line up exactly when the zip is closed, which needs accurate cutting and a sample check. Large chest prints across the zip line are possible but break visually and need careful registration. Many brands put a small chest logo on one side and the main graphic on the back, which keeps the front clean and avoids printing over the placket.

Two-way zip hoodie manufacturer: typical specs and key numbers

SpecTypical estimate range
Body fleece weight300-450 GSM
Zip length across size range55-75 cm
Zip length grading step2-3 cm
Fleece length shrinkage if washed3-6%
Sample time10-15 days
Home wash test before approval3-5 washes
Bulk production after approval35-50 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • A two-way zip hoodie manufacturer fits a double slider zipper so the front opens from the top or the bottom.
  • Choose metal, plastic or coil zips to match fleece weight and look.
  • Grade zip length by size to prevent waving plackets.
  • Stabilise the placket and plan shrinkage if the hoodie is washed.
  • Test both sliders on a washed sample before bulk.

Request a two-way zip hoodie quote

Ready to sample your two-way zip hoodie? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What is the benefit of a two-way zip on a hoodie?

It lets the wearer open the hem while keeping the chest closed, which is more comfortable when sitting.

Are two-way zips more expensive?

Yes, the zipper and installation cost more than a one-way zip.

Which zip size suits a hoodie?

Size 5 is common; size 8 gives a bolder look on heavy fleece.

Can two-way zip hoodies be garment washed?

Yes, if the zip is tested for the wash or the fleece is washed before cutting.

What is the MOQ for two-way zip hoodies?

MOQ depends on style and fabric, so we confirm it in your quote.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.