oem-odm · B2B PROCUREMENT

Half Zip Hoodie Manufacturer: Zip, Fleece and QC Guide

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Half zip hoodie manufacturer programs build pullover hoodies with a front zip of about 18-28 cm, usually on 320-450 GSM fleece. Zip type, placket build and hood shape define the look; plan 2-3 sample rounds of 10-15 days and 35-50 days for bulk. MOQ depends on style and fabric.

Half zip hoodie manufacturer programs build pullover hoodies with a front zip of about 18-28 cm, usually on 320-450 GSM fleece. Zip type, placket build and hood shape define the look; plan 2-3 sample rounds of 10-15 days and 35-50 days for bulk. MOQ depends on style and fabric.

The half zip hoodie sits between a classic pullover and a full zip-up. It keeps the clean, uninterrupted front of a pullover for prints and embroidery, but the zip opens the neck when the wearer gets warm or wants a layered look. It has become a strong style for streetwear, outdoor-inspired casualwear, golf and team merch. Getting it right depends on details that do not exist on a regular hoodie: zip length, zipper type, placket construction and how the hood joins the zip. This guide explains what a half zip hoodie manufacturer needs to know and how to brief it.

What is a half zip hoodie manufacturer?

A half zip hoodie manufacturer is a hoodie factory that makes pullover hoodies with a partial front zip, usually 18-28 cm long, set into a placket from the neck down toward the chest. The zip lets the wearer open the neck for ventilation without the full opening of a zip-up. Most programs use 320-450 GSM fleece with a metal or coil zip, and the zip, placket and hood are confirmed on a fit sample before bulk.

What are the main design choices?

  • Zip length. Most half zips run 18-28 cm from the neck. Short zips are more like a quarter zip; longer zips open further.
  • Zipper type. Metal teeth look heritage and rugged; coil zips are lighter and smoother; molded plastic zips suit sporty looks.
  • Zip finish. Exposed teeth for a utility look, or a concealed or covered placket for a clean look.
  • Pull. Standard pull, branded metal pull, or a fabric or cord pull.
  • Hood. Two or three panel hood, with or without drawcords, lined or single layer.
  • Body. Kangaroo pocket, side seam pockets or no pockets; ribbed or raw hem.

Planning a half zip hoodie? Weavnora develops heavyweight hoodies and sweatshirts, and we confirm half zip feasibility, zip length, zip type, placket and fit on a sample before bulk. See our OEM hoodie development page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Half zip hoodie vs full zip hoodie: which option fits?

Selection criteriaHalf zip hoodieFull zip hoodie
Front openingNeck to chestFull length
Front print areaLarge and uninterrupted below the zipSplit by the zip
Kangaroo pocketYes, standardSplit pockets
VentilationNeck onlyFull
LookSporty, outdoor, modernClassic, versatile
ConstructionPlacket and zip set into a pullover bodyZip along both front panels

The trade-offs are print space against convenience. A half zip keeps a large, clean front for graphics and a full kangaroo pocket while adding some ventilation, but it is pulled on over the head. A full zip is easier to wear and layer, yet splits the front graphic. Our zip-up hoodie manufacturer guide covers the full zip route, and our quarter zip sweatshirt RFQ checklist covers the hoodless version.

How is the placket built?

The zip is set into a slit in the centre front. The placket must lie flat when closed and should not wave or bubble. Key points:

  • Interfacing. A light fusible tape along the placket stops stretching and waving.
  • Facing. An inside facing or binding covers raw edges; many brands use a contrast tape as a detail.
  • Bottom of the zip. The end is reinforced with a box stitch or bartack, because it takes strain when the hoodie is pulled on.
  • Zip garage. A small fabric fold at the top covers the pull and protects the chin.
  • Hood join. The hood and zip must meet cleanly at the neck so the hood sits evenly.

Which fleece and weights work?

Half zip hoodies work on brushed fleece, loopback french terry and heavyweight cotton fleece from about 320-450 GSM. Heavier fleece looks premium but makes the placket thicker, so the zip must be strong enough. Lighter fleece suits sporty and layered looks. Our hoodie fleece GSM guide helps choose the weight.

How should you brand a half zip hoodie?

  • Front. Print or embroider below the zip end; leave about 3-5 cm of space so the graphic is not crowded.
  • Chest. Small logos on the left chest beside the zip.
  • Zip pull. A custom metal pull with your logo is a strong premium detail.
  • Placket tape. Printed or jacquard tape inside the placket.
  • Back and sleeves. Standard print and embroidery areas.

Which sizes and fits suit a half zip hoodie?

Half zip hoodies are often cut in a relaxed or oversized fit, because the wearer pulls them over the head and wants room to layer. Common details include a dropped shoulder, a slightly cropped or boxy body and a longer sleeve with a deep rib cuff. A regular fit suits team and corporate merch. Whatever fit you choose, check the neck opening on the smallest size, because a short zip on a small neck can make the hoodie hard to pull on. Grade the zip length by size if the size range is wide.

What quality checks apply?

  • Zip runs smoothly the full length with no catching on the fabric.
  • Placket lies flat, with no waving, and both sides are even.
  • Zip bottom reinforcement is secure.
  • Pull strength and slider function checked on samples; see our zipper pull strength and slider QC guide.
  • Measurements within tolerance, typically about 1-2 cm on body measurements.
  • Neck opening is large enough to pull over the head when the zip is open.

How do you sample a half zip hoodie?

  1. Approve fleece, colour and zip type from swatches.
  2. Make a fit sample with the zip length and placket finish.
  3. Check pull-on comfort, placket flatness and hood shape.
  4. Add branding on the next sample round.
  5. Approve a pre-production sample as the bulk reference.

Each round typically takes 10-15 days, and most programs approve in 2-3 rounds. The custom hoodie and sweatshirt manufacturing guide shows the full development timeline.

What should you send to get a quote?

  • Sketch or reference photo, with zip length and zip type.
  • Fleece weight, fibre content and colour.
  • Hood, pocket and hem details.
  • Branding method, size and placement.
  • Quantities per colour and size, and a target delivery date.

Half zip hoodie manufacturer: typical specs and key numbers

SpecTypical estimate range
Hoodie fleece weight320-450 GSM
Half zip length18-28 cm
Space below zip for front graphic3-5 cm
Body measurement tolerance1-2 cm
Sample lead time per round10-15 days
Bulk production after approval35-50 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • A half zip hoodie manufacturer builds pullover hoodies with an 18-28 cm front zip.
  • Zip type, placket finish and hood join define the look and quality.
  • Interfacing and a reinforced zip end keep the placket flat and strong.
  • A half zip keeps a large uninterrupted front for graphics.
  • Approve zip, placket and fit on a sample before bulk.

Request a half zip hoodie manufacturer quote

Ready to sample half zip hoodies? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What is a half zip hoodie?

It is a pullover hoodie with a partial front zip, usually 18-28 cm, that opens the neck without a full-length zip.

How long is the zip on a half zip hoodie?

Most run about 18-28 cm from the neck; the exact length is set on the fit sample.

Can I print on the front of a half zip hoodie?

Yes. Graphics go below the zip end, with about 3-5 cm of clear space.

Which zip is best for a half zip hoodie?

Metal zips look premium and rugged; coil zips are lighter and smoother; choose by style.

What is the MOQ for half zip hoodies?

MOQ depends on style and fabric. Send your specs and quantities through a quote request.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.