oem-odm · B2B PROCUREMENT
Side Slit T-Shirt Manufacturer: Vent Builds, Fit and QC
By Weavnora · Updated

Direct answer
What buyers need to know
Side slit t-shirt manufacturer programs cut and sew tees with open vents at the lower side seams, usually 4-10 cm long, on 200-300 GSM jersey. Expect bartacks or a small facing at the top of each slit, 2-3 sample rounds of 7-15 days, and 30-45 days for bulk. MOQ depends on style and fabric.
Side slit t-shirt manufacturer programs cut and sew tees with open vents at the lower side seams, usually 4-10 cm long, on 200-300 GSM jersey. Expect bartacks or a small facing at the top of each slit, 2-3 sample rounds of 7-15 days, and 30-45 days for bulk. MOQ depends on style and fabric.
A side slit looks like a small detail on a tech pack, but it changes how a tee hangs, how it is sewn and how it survives the wash. Brands add slits to oversized and longline tees so the hem does not cling at the hip, and to give a basic tee a more considered, premium look. The detail also creates new weak points: the top of the slit takes stress every time the wearer sits or stretches, and washed jersey can curl or ripple at an open edge. This guide explains what a side slit t-shirt manufacturer controls, how to choose a slit build, and what to check on samples before you approve bulk.
What is a side slit t-shirt manufacturer?
A side slit t-shirt manufacturer is a cut-and-sew factory that makes tees with short open vents at the bottom of each side seam, finished with a narrow hem or facing and reinforced at the top of the slit. The vent lets a boxy or longline tee drape over hips and waistbands. Typical slits run 4-10 cm on 200-300 GSM jersey, and the slit top is usually bartacked with 20-30 stitches so it does not tear open after washing.
Which slit construction should you choose?
There are three common ways to build a side slit on a knit tee, and each one suits a different fabric weight and look:
- Turned and coverstitched slit. The slit edges are folded once and coverstitched together with the hem. It is fast, flexible and fine for 180-240 GSM jersey.
- Faced slit. A small strip of self fabric or tape is sewn inside each slit edge. It lies flatter on heavyweight 260-300 GSM jersey and looks cleaner from the inside.
- Blind hem or single needle slit. Used where the brand wants almost invisible stitching. It needs a stable fabric and careful pressing, so it is usually reserved for premium lines.
Whatever the build, the top of the slit needs reinforcement. A bartack, a small triangle stitch or a short tape patch stops the side seam from splitting further. Ask your factory which method they propose and why.
Planning a split hem tee? Weavnora sews heavyweight and washed tees with custom hem details and confirms slit length, reinforcement and wash behaviour on a sample before bulk. See our oversized t-shirts page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
How long should a side slit be?
Slit length depends on body length, fit and the effect you want. As a planning range:
| Tee style | Typical body length | Typical slit length |
|---|---|---|
| Regular fit tee | 68-74 cm | 3-5 cm |
| Boxy or oversized tee | 70-78 cm | 5-8 cm |
| Longline tee | 78-90 cm | 8-12 cm |
A slit that is too short looks like a mistake, and one that is too long can flap open and show the waistband. Draw the slit on a flat sketch with its length measured from the hem edge, and give a tolerance of plus or minus 0.5 cm. Our longline t-shirt manufacturer guide covers the longer body proportions that often pair with deeper slits.
Even hem vs step hem side slit tees: which option fits?
Many side slit tees also use a step hem, where the back panel is longer than the front. Here is how the two main options compare:
| Selection criteria | Even hem with side slits | Step hem with side slits |
|---|---|---|
| Look | Clean, minimal | Layered, streetwear |
| Back length difference | 0 cm | 2-6 cm longer at back |
| Pattern work | Simple | Separate front and back hem lines |
| Sewing time | Lower | Slightly higher |
| Best for | Basics, washed tees | Oversized and longline tees |
| Risk | Slit may look shallow | Uneven step after washing |
The trade-offs are simplicity against visual interest. An even hem is easier to keep consistent across sizes. A step hem stands out on the hanger but needs both hem lines graded carefully, and garment washing can shrink front and back slightly differently. If you are new to the detail, start with an even hem and add a step hem in a later drop.
What fabric weight works best for side slits?
Heavier jersey makes the slit hang better, but it also makes the edges thicker to fold. Most programs use 220-280 GSM combed cotton jersey. Lighter fabric under 180 GSM tends to curl at the slit edge, especially after washing. Very heavy 300 GSM fabric can create a bulky slit top, which is why a faced slit often works better there. If you are choosing between weights, our heavyweight t-shirt GSM guide helps you match weight to fit before you add hem details.
Does washing affect side slits?
Yes. Garment dyeing, enzyme washes and vintage washes all relax and shrink the fabric, and an open edge shows this more than a closed hem. Common issues are rippled slit edges, slits that end up different lengths on left and right, and thread breaks at the bartack. Ask your manufacturer to wash the first sample with the bulk wash recipe, then measure slit length and check the reinforcement after 3-5 home washes. Our washed t-shirt shrinkage and size tolerance guide explains how to set tolerances for washed tees.
What should you check on the sample?
- Slit length on both sides, against the spec and tolerance.
- Slit top reinforcement, pulled gently to see if stitches hold.
- Edge flatness after washing, with no curling or waviness.
- Hem alignment, so the front and back hems meet neatly at each slit.
- Seam allowance inside the side seam above the slit, which should be neat and not fray.
- Print placement, especially if a graphic sits near the lower hem.
Record these points in a short QC sheet so the bulk inspection uses the same list. The same discipline applies to other hem details; our split hem hoodie manufacturer guide shows how slits are handled on fleece.
What should you send for a quote?
- A reference tee or tech pack with body length, chest width and slit length per size.
- Even hem or step hem, and the preferred slit construction.
- Fabric weight and composition, plus colour and any wash.
- Decoration type, size and placement.
- Quantities by colour and size, and the delivery window you are aiming for.
For a full overview of tee development, from fabric to final inspection, see our custom t-shirt manufacturing guide. If you also want exposed construction details, the exposed seam t-shirt manufacturer guide pairs well with side slits.
Side slit t-shirt manufacturer: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Tee fabric weight | 200-300 GSM |
| Side slit length | 4-10 cm |
| Step hem back extension | 2-6 cm |
| Bartack at slit top | 20-30 stitches |
| Shrinkage before allowances | 3-5% |
| Sample lead time per round | 7-15 days |
| Bulk production after approval | 30-45 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- A side slit t-shirt manufacturer builds open vents at the lower side seams and reinforces the top of each slit.
- Choose slit length by fit: shorter on regular tees, longer on boxy and longline styles.
- Even hems are simpler; step hems look more streetwear but need careful grading.
- Wash the sample with the bulk recipe and check slit length, edges and reinforcement.
- Put slit length and tolerance per size into the tech pack and QC sheet.
Request a side slit t-shirt manufacturer quote
Ready to sample a side slit tee? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What is a side slit t-shirt?
It is a tee with short open vents at the bottom of the side seams, which lets the hem drape and adds a premium detail.
How long should a t-shirt side slit be?
Most slits run 4-10 cm, shorter on regular tees and longer on longline or oversized tees.
Will side slits tear after washing?
Not if the slit top is reinforced with a bartack or facing and the sample is wash tested before bulk.
Can you make side slits on heavyweight tees?
Yes. Heavyweight 260-300 GSM tees often use a faced slit so the edge lies flat.
What is the MOQ for side slit tees?
MOQ depends on style, fabric and colours. Send your references and quantities through a quote request.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.