oem-odm · B2B PROCUREMENT
Scallop Hem T-Shirt Manufacturer: Curve, Length, QC
By Weavnora · Updated

Direct answer
What buyers need to know
Scallop hem t-shirt manufacturer programs finish the body with a curved or wavy lower edge instead of a straight hem, often longer at the back. Most styles use 180-300 GSM cotton jersey, a 2-6 cm front-to-back drop, 2-3 sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
Scallop hem t-shirt manufacturer programs finish the body with a curved or wavy lower edge instead of a straight hem, often longer at the back. Most styles use 180-300 GSM cotton jersey, a 2-6 cm front-to-back drop, 2-3 sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
A scallop or curved hem changes the whole stance of a tee. The lower edge dips at the sides or runs longer at the back, so the tee hangs differently over jeans, shorts and layered looks. It is a small pattern change with a large visual effect, and it is also easy to sew badly: wavy stitch lines, uneven left and right curves, or a hem that flips after washing. This guide explains what a scallop hem t-shirt manufacturer controls, how to set front and back lengths, and how to keep the curve clean through wash and bulk.
What is a scallop hem t-shirt manufacturer?
A scallop hem t-shirt manufacturer is a cut-and-sew factory that finishes tee bodies with a curved, wavy or elongated lower edge rather than a straight coverstitched hem. Typical programs use 180-300 GSM cotton jersey with a 2-6 cm difference between front and back length, then sew the curve with coverstitch or twin needle so it stays smooth after wash. As a typical industry estimate, plan 2-3 sample rounds of 7-15 days each to lock the curve depth before bulk.
Why do brands choose a scallop or curved hem?
Straight hems are the default for basics. A scallop or elongated back hem reads fashion-forward and helps the tee sit better when the wearer raises their arms or layers over a longer top. Streetwear brands use it for elongated silhouettes; fashion brands use a softer side curve for a less boxy finish. The detail also photographs well because the hem line is not a hard horizontal. Our custom t-shirt manufacturing guide covers how hem choices sit beside neckline and sleeve decisions.
Want a curved hem tee program? Weavnora cuts heavyweight and washed cotton tees and can confirm scallop or curved hem depth on a fit and wash sample before bulk. The hem shape is proven on your pattern rather than assumed from a stock blank. See our heavyweight jersey fabric page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
How is a scallop hem built in production?
Clarify the shape before cutting:
- Simple curved hem. Front and back both curve gently, often lower at the side seams.
- Elongated back hem. Back length is 2-6 cm longer than the front, with a smooth side transition.
- True scallop. Repeating soft waves along the hem; less common on heavy jersey because waves need precise sewing.
- Asymmetric curve. One side longer for a styled look; needs strict left-right QC.
Sewing options include coverstitch, twin needle and, on lighter jersey, a narrow rolled finish. Heavyweight cotton usually takes a coverstitch folded hem that follows the cut curve. Cut the body with the curve in the marker; do not try to shape a straight hem on the sewing line alone. Our 100% cotton washed tee OEM guide explains how wash can tighten or ripple a curved edge.
Which GSM works best for a scallop hem?
Thin jersey can ripple along a curve. Heavy jersey holds the line but needs a sharp cut and even folding.
| Tee type | Typical GSM | Hem behaviour |
|---|---|---|
| Light fashion tee | 160-180 GSM | Soft curve, can ripple |
| Classic retail tee | 180-220 GSM | Balanced fold and sew |
| Heavyweight streetwear tee | 220-300 GSM | Firm curve, clean coverstitch |
| Extra heavy statement tee | 300-320 GSM | Stable edge, careful fold depth |
Most scallop and elongated back programs land in 180-300 GSM. For washed routes, approve the curve after wash because length can move 3-5%. See our 240gsm heavyweight tee manufacturer guide and 260gsm cotton t-shirt OEM supplier notes.
Scallop hem vs straight hem: which option fits?
Both finishes are valid. Choose based on silhouette and how much sewing precision you want to buy.
| Selection criteria | Scallop or curved hem | Straight hem |
|---|---|---|
| Look | Fashion, elongated, softer edge | Clean, classic, retail-standard |
| Pattern work | Curve in marker, front-back drop | Simple horizontal hem |
| Sewing skill | Higher; even left-right curve | Standard coverstitch |
| Wash risk | Curve can ripple or tighten | More predictable |
| Layering | Better over longer tops | Neutral |
| Best use | Streetwear, fashion drops | Core basics, logo tees |
The trade-offs are a more styled silhouette and better layering against tighter pattern control and higher QC attention on left-right symmetry. Many brands keep core blanks straight-hemmed and reserve curves for a seasonal drop. Our 220-300 GSM cotton dye route helps when colour and wash approvals share the same sample path.
How do you keep the curve even after washing?
- Mark front length, back length and side seam length on the size chart.
- Keep left and right curves within about 0.5 cm of each other.
- Fold hem depth evenly, usually 1.5-2.5 cm, following the cut edge.
- Wash a sample and re-measure; add allowance if the back shortens more than the front.
- Avoid overstretching the curve under the coverstitch foot, which creates ripples.
- For garment dye, confirm the folded hem takes dye evenly at the edge.
Our 220-300 GSM OEM sampling guide is a practical sequence for heavy cotton approvals.
What should a sample and QC plan include?
- Pattern review with front, back and side lengths written down.
- Fit sample in the base size, checked flat and on a body.
- Wash test for curve shape, ripple and length change.
- Size set check on the smallest and largest sizes.
- Pre-production sample sealed as the bulk standard.
Each round typically takes 7-15 days, and most programs approve in 2-3 rounds. Our 280gsm heavyweight cotton tee RFQ notes show how to list hem geometry in a quote request.
What do you send for an accurate quote?
- A reference tee or tech pack with front length, back length and curve notes.
- Target GSM band and hem sew method preference.
- Colours and whether the tee is piece dyed, garment dyed or washed.
- Decoration, size and placement.
- Quantities by colour and size and your delivery window.
Related reading: 300 GSM t-shirt manufacturer guide and 220gsm cotton t-shirt OEM quote path. Weavnora focuses on heavyweight and washed tees, hoodies, sweatshirts, sweatpants and related merch; we do not make woven trousers or tailored coats.
Scallop hem t-shirt manufacturer: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Tee fabric weight | 180-300 GSM |
| Front-to-back hem drop | 2-6 cm |
| Hem fold depth | 1.5-2.5 cm |
| Length shrinkage after wash | 3-5% |
| Sample lead time per round | 7-15 days |
| Bulk production after approval | 30-45 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- A scallop hem t-shirt manufacturer finishes the body with a curved or elongated lower edge instead of a straight hem.
- Typical front-to-back drops land in 2-6 cm on 180-300 GSM cotton jersey.
- Cut the curve into the marker and keep left-right symmetry within about 0.5 cm.
- Wash-test for ripple and length change before bulk.
- Plan 2-3 sample rounds of 7-15 days and confirm MOQ by style and fabric in the quote.
Request a scallop hem t-shirt manufacturer quote
Ready to sample scallop hem tees? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What is a scallop hem on a t-shirt?
It is a curved, wavy or elongated lower edge instead of a straight hem, often with the back longer than the front.
How much longer should the back be?
Many programs use a 2-6 cm front-to-back difference, adjusted to the silhouette and fabric weight.
Does heavyweight jersey work with a curved hem?
Yes. 220-300 GSM cotton holds a firm curve; thinner jersey can ripple and needs careful sewing.
Will the curve change after washing?
It can tighten or ripple. Wash a sample, re-measure front and back lengths and add allowance if needed.
What is the MOQ for scallop hem tees?
MOQ depends on style, fabric and colours. Send your references and quantities through a quote request.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.