oem-odm · B2B PROCUREMENT
Raw Hem T-Shirt Manufacturer: Builds, Fray and QC
By Weavnora · Updated

Direct answer
What buyers need to know
Raw hem t-shirt manufacturer programs leave the body or sleeve hem unfinished so the cut edge shows a soft, slightly frayed finish after washing. Most styles use 200-300 GSM cotton jersey, a 1.5-3 cm raw edge, 2-3 wash and fit sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
Raw hem t-shirt manufacturer programs leave the body or sleeve hem unfinished so the cut edge shows a soft, slightly frayed finish after washing. Most styles use 200-300 GSM cotton jersey, a 1.5-3 cm raw edge, 2-3 wash and fit sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
Raw hems look simple: cut the jersey and leave the edge alone. On a real production floor the detail is harder. Cotton jersey rolls, frays and shortens after washing, and an edge that looks clean on a sewing table can look messy or uneven after a garment wash. Brands still want the unfinished look because it reads casual, slightly distressed and less "factory finished" than a coverstitched hem. This guide explains what a raw hem t-shirt manufacturer actually controls, how to keep the fray intentional, and how to write the detail into a tech pack before you order bulk.
What is a raw hem t-shirt manufacturer?
A raw hem t-shirt manufacturer is a cut-and-sew factory that finishes tees with an unfinished cut edge at the body hem, sleeve hem or both, instead of a folded and coverstitched hem. The raw edge is usually cut 1.5-3 cm past the intended finish line on 200-300 GSM cotton jersey, then washed so it softens and frays in a controlled way. As a typical industry estimate, plan 2-3 sample rounds of 7-15 days each to lock the fray level before bulk.
Why do brands choose a raw hem on cotton tees?
An unfinished hem changes the silhouette and the story of a basic tee. It softens the bottom edge after washing and pairs well with oversized fits, pigment dyes and vintage washes. It also removes one sewing operation on a busy line. The risk is uncontrolled fray: loose yarns that keep shedding, uneven lengths between left and right sides, and returns when the hem looks unfinished rather than designed. Our 100% cotton washed tee OEM guide covers how washing changes jersey handfeel and edge behaviour.
Want a raw hem tee program? Weavnora cuts heavyweight and washed cotton tees and can confirm a raw hem finish on a wash sample before bulk. Raw hem is not a fixed catalog style, so we prove the edge behaviour on your fabric first. See our heavyweight jersey fabric page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
How is a raw hem built in production?
There are a few common methods. Pick one and stick to it across sizes.
- Straight cut after sewing. The body is sewn, then the hem is cut to the final length with a sharp blade. Cleanest for a crisp raw look.
- Cut then wash. The edge is cut slightly long, then the garment wash softens and lightly frays it. Best for vintage and acid wash programs.
- Selective raw edge. Body hem raw, sleeves coverstitched, or the reverse. Keeps a cleaner sleeve while the body stays casual.
- Stabilised raw edge. A single needle stay stitch 0.3-0.8 cm above the cut slows runaway fray without hiding the edge.
Write the method, the raw edge depth and whether the edge is washed into your tech pack. Our 240 GSM heavyweight tee manufacturer guide helps you pick a fabric weight that holds a raw edge without collapsing.
Which GSM works best for a raw hem?
Thin jersey frays into a wispy edge. Heavy jersey holds a denser fringe. Typical planning bands:
| Tee type | Typical GSM | Raw hem behaviour |
|---|---|---|
| Light fashion tee | 160-180 GSM | Soft, can fray unevenly |
| Classic retail tee | 180-220 GSM | Balanced soft fringe |
| Heavyweight streetwear tee | 220-300 GSM | Dense, controlled edge |
| Extra heavy statement tee | 300-350 GSM | Firm edge, less roll |
Most streetwear raw hem programs land in 200-300 GSM cotton jersey. Very heavy bodies need a sharp cut and careful wash, or the edge can look stiff. See our 300 GSM t-shirt manufacturer guide and 350 GSM t-shirt manufacturer notes when you compare weights.
Raw hem vs coverstitch hem: which option fits?
Both finishes are valid. Choose based on the product story and how much edge movement you accept after washing.
| Selection criteria | Raw hem tee | Coverstitch hem tee |
|---|---|---|
| Look | Casual, unfinished, vintage | Clean, retail-standard |
| Sewing steps | Fewer at the hem | Extra hem operation |
| Fray after wash | Intentional, needs control | Minimal |
| Length stability | Can shorten 0.5-1.5 cm after wash | More stable |
| Best use | Streetwear, washed drops | Core basics, logo tees |
| QC focus | Edge evenness, fray depth | Coverstitch skips, stretch |
The trade-offs are design interest and a lighter sewing load against higher QC attention and a hem that can keep changing in the customer's laundry. Many brands keep core blanks on a coverstitch hem and reserve raw hems for a washed capsule. Our acid wash vs enzyme wash heavyweight tees guide explains how wash routes change edge texture.
How do you control fray and length?
Control comes from fabric, cut and wash:
- Approve a fabric swatch and wash a panel before cutting bulk markers.
- Cut the raw edge with a sharp blade; dull blades crush yarns and create uneven fray.
- Keep raw edge depth consistent, usually 1.5-3 cm of visible unfinished edge after wash.
- Record length before and after wash; add allowance if the wash shortens the body by 0.5-1.5 cm.
- Avoid aggressive high-abrasion washes if you want a short, neat fringe.
- Check both side seams so left and right hems sit within about 0.5 cm.
Our acid wash t-shirts overview notes how chemical washes interact with cut edges. For dye planning on heavy cotton, see the 220-300 GSM cotton dye route.
What should a sample and QC plan include?
- Fabric and wash panel to set fray depth and shrinkage.
- Fit sample in the base size with the chosen raw hem method.
- Size set check on the smallest and largest sizes for hem evenness.
- Pre-production sample sealed as the bulk standard after wash.
- Bulk inspection for hem height, edge cleanliness and loose yarn clumps.
Each sample round typically takes 7-15 days. Most programs approve in 2-3 rounds. Use the apparel final inspection checklist for t-shirt OEM buyers and our 220-300 GSM OEM sampling notes when you write the QC sheet. For the wider development path, start with the custom t-shirt manufacturing guide.
What do you send for an accurate quote?
- A reference tee or clear photos of the raw edge you want.
- Target GSM band and fibre (usually 100% cotton jersey).
- Whether the hem is raw on body only, sleeves only or both.
- Wash or dye route, colours and decoration.
- Quantities by colour and size and your delivery window.
Weavnora focuses on heavyweight and washed tees, hoodies, sweatshirts, sweatpants and merch on those bodies. We do not make leather goods, swimwear or tailored outerwear; if your line needs those, another factory type is a better fit.
Raw hem t-shirt manufacturer: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Tee fabric weight | 200-300 GSM |
| Visible raw edge depth | 1.5-3 cm |
| Length change after wash | 0.5-1.5 cm |
| Hem height tolerance | 0.5 cm |
| Sample lead time per round | 7-15 days |
| Bulk production after approval | 30-45 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- A raw hem t-shirt manufacturer leaves a controlled unfinished edge instead of a folded coverstitch hem.
- Use 200-300 GSM cotton jersey for a denser, more predictable fringe.
- Lock fray depth and length on a wash sample before bulk markers.
- Compare raw hem vs coverstitch hem by story, QC load and length stability.
- Write method, edge depth and wash route into the tech pack and PO.
Request a raw hem t-shirt manufacturer quote
Ready to sample raw hem tees? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What is a raw hem on a t-shirt?
It is an unfinished cut edge at the body or sleeve hem that is left open so it softens and lightly frays after washing.
Will a raw hem keep fraying forever?
A controlled raw hem frays most in the first washes, then settles. Stabilising stitches and the right wash keep shedding low.
Which GSM is best for raw hem tees?
Most streetwear programs use 200-300 GSM cotton jersey because the denser knit holds a neater fringe than light jersey.
Can raw hems be garment washed?
Yes. Many brands cut the edge then wash the garment so the fringe softens. Approve the wash on a sample first.
What is the MOQ for raw hem tees?
MOQ depends on style, fabric and colours. Send references and quantities through a quote request.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.