oem-odm · B2B PROCUREMENT

Lab Dip Cost: Paying for Custom Colour Matching

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Lab dip cost is the charge for dyeing small fabric samples to match a custom colour before bulk dyeing. It depends on the number of colours, matching rounds, fabric and dye type and reference quality. Most colours need 1-3 rounds of 3-7 days each, with 2-4 dip options submitted per round. MOQ depends on style and fabric.

Lab dip cost is the charge for dyeing small fabric samples to match a custom colour before bulk dyeing. It depends on the number of colours, matching rounds, fabric and dye type and reference quality. Most colours need 1-3 rounds of 3-7 days each, with 2-4 dip options submitted per round. MOQ depends on style and fabric.

Custom colours help a brand stand out, but every new shade starts with a lab dip. It is the step where the dye house mixes a recipe, dyes a small piece of your fabric and sends it for approval. Lab dips are sometimes free for large orders and charged for small ones, and charges vary by supplier, colour difficulty and the number of rounds. Without understanding the process, buyers can end up paying for many rounds on a colour that was hard to match from the start. This guide explains what lab dip cost covers, what pushes it up, and how to brief colours efficiently. It does not give prices, because those depend on the supplier and your order.

What is lab dip cost?

Lab dip cost is the fee a mill or factory charges to develop dyed sample swatches that match your colour standard before fabric or garments are dyed in bulk. It covers dye recipe work, small-scale dyeing, measurement and submission of options. Most custom colours need 1-3 rounds of 3-7 days each, with 2-4 options submitted per round for your approval.

How does the lab dip process work?

You send a colour standard: a physical swatch, a Pantone or other colour system reference, or a previous garment. The lab creates a dye recipe and dyes small swatches of your fabric, usually submitting several options close to the target, labelled A, B and C. You compare them with the standard under agreed lighting and approve one or ask for another round. The approved dip becomes the reference for bulk dyeing.

Many labs measure colour with a spectrophotometer and report a colour difference value, but the final decision is usually visual under standard light sources. Agree which light sources will be used, for example daylight and store lighting, because some colours look different under each. Our apparel lab dip approval timeline guide explains timing in more detail.

Developing custom colours? Weavnora develops custom colours for tees, hoodies and sweatpants and can submit lab dips on your chosen fabric so you can approve shades before bulk dyeing. See our garment dye page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Which factors make lab dips cost more?

The number of colours is the first driver: each custom colour needs its own dip. The number of rounds is the second. A colour approved in the first round costs less than one that takes three rounds. Colour difficulty matters: very bright, very dark, neon or unusual shades are harder to match and may need special dyes. Fabric type matters too. Cotton fleece, jersey, rib and blends each take dye differently, and matching the same colour on body fabric and rib can mean separate dips.

Dye method is another factor. Piece-dyed fabric, garment dyeing and pigment dyeing each need their own process. A colour matched for piece-dyed jersey may not transfer directly to a garment-dyed hoodie. Finally, the quality of your reference affects rounds: a clear physical standard usually matches faster than a screen colour. Our lab dip approval workflow for garment dyed tees covers the garment dye route.

Physical swatch vs colour system reference vs digital file: which option fits?

Selection criteriaPhysical swatch on similar fabricColour system reference (TCX or TPG)Digital colour value or screen colour
Matching accuracyHighestHighLow to medium
Typical rounds neededFewestFewMost
Risk of misunderstandingLowLow to mediumHigh
Effort for the brandNeed to source swatchBuy or reference a bookEasy
Works across fabricsGood if fabric is similarGoodPoor
Best forCore brand coloursSeasonal coloursEarly concept only

The trade-offs are effort against accuracy and cost. A physical swatch on similar fabric needs more effort upfront but usually cuts rounds and cost. Colour system references are a good balance. Digital or screen colours are convenient but often lead to extra rounds because screens vary. Our t-shirt colour approval workflow guide explains how to set colour standards.

How do rib, trims and sets affect lab dips?

Hoodies and sweatpants often combine body fabric with rib cuffs, waistbands and sometimes contrast pockets. Each fabric may need a separate dip to match the body colour. Drawcords, zip tapes and thread may also need colour matching, sometimes through different suppliers. Matching sets add the challenge of tops and bottoms in different fabrics, such as a fleece hoodie with a french terry pant. Plan which components must match exactly and which can be close. The how to colour match hoodie and sweatpants sets guide explains set matching, and the shade continuity across colorways guide covers bulk consistency.

How can you reduce lab dip cost?

Use stock colours where custom shades are not essential. Send physical standards and agree light sources before the first round. Approve quickly and give clear comments, such as "slightly too red, needs more yellow", rather than "not right". Group colours so the lab can dip several at once. Reuse approved recipes for reorders, and keep approved dips on file. Some suppliers credit lab dip fees against bulk orders; ask whether that applies.

How does lab dip cost fit into total cost?

Lab dips are a development cost, next to samples, strike-offs and tech packs. On a single colour it is small. Across a collection of many custom colours and fabrics, it adds up, along with time. The apparel manufacturing cost and pricing guide shows where development fees sit, and the strike off cost guide covers the similar print approval step.

What should you send for a lab dip quote?

Send your colour standards, the fabrics to match on, the dye method, the number of colours, your preferred light sources and your timeline. Ask how many options per round are included and whether fees are credited against bulk.

Lab dip cost: typical specs and key numbers

SpecTypical estimate range
Lab dip rounds per colour1-3 rounds
Time per round3-7 days
Options submitted per round2-4 options
Lab dip swatch size10-15 cm square
Cotton fleece weight for hoodie dips280-400 GSM
Bulk dyeing after approval7-15 days
Total colour approval time per shade7-21 days
Rib dip time when matched separately3-7 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • Lab dip cost pays for matching each custom colour on your fabric before bulk dyeing.
  • Colour count, rounds, colour difficulty, fabric type and dye method drive the cost.
  • Physical swatches and agreed light sources cut the number of rounds.
  • Body fabric, rib and trims may each need separate dips.
  • Reuse approved recipes and ask whether fees are credited against bulk.

Request a custom colour quote

Ready to match your brand colours? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What is a lab dip?

A small fabric sample dyed to match your colour standard before bulk dyeing.

Are lab dips free?

Sometimes for larger orders; many suppliers charge per colour or credit fees against bulk.

How many lab dip rounds are normal?

Most colours are approved in 1-3 rounds.

Do rib and body need separate lab dips?

Often yes, because different fabrics take dye differently.

What is the MOQ for custom colours?

MOQ depends on style and fabric, so we confirm it in your quote.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.