blog · B2B PROCUREMENT

How to Find a Fleece Fabric Supplier for Hoodies and Sweats

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

How to find a fleece fabric supplier starts with a clear spec: fibre content, 280-450 GSM weight, brushing, width and colour. Then compare mills, traders and full-package factories, request swatches within 5-10 days, test shrinkage and pilling, and order a sample length before bulk. MOQ depends on style and fabric, so confirm it in your quote.

How to find a fleece fabric supplier starts with a clear spec: fibre content, 280-450 GSM weight, brushing, width and colour. Then compare mills, traders and full-package factories, request swatches within 5-10 days, test shrinkage and pilling, and order a sample length before bulk. MOQ depends on style and fabric, so confirm it in your quote.

Fleece is the base of almost every hoodie, crewneck and pair of sweatpants, so the fabric supplier has a direct effect on how your products feel, wash and sell. Yet many brands pick fleece by touching a header card and hoping bulk matches. Finding the right fleece supplier is a process: define what you need, look in the right places, test before you commit and set clear approval rules. This guide walks through that process in seven steps.

What does it mean to find a fleece fabric supplier?

To find a fleece fabric supplier is to identify and vet a mill, trader or full-package garment factory that can supply knitted fleece, usually cotton or cotton-polyester three-thread fleece of 280-450 GSM, to your exact spec for hoodies, sweatshirts and sweatpants. It covers defining the spec, shortlisting sources, requesting swatches, testing weight, shrinkage and pilling, and confirming colour, lead time and minimum quantities before bulk.

Step 1: Write a fleece specification

Before contacting anyone, write down:

  • Fibre content: 100% cotton, cotton-rich blend such as 80/20, or cotton face with polyester back.
  • Construction: three-thread brushed fleece, loopback French terry, or both.
  • Weight: a target with a range, for example 380 GSM, within 360-400 GSM.
  • Brushing: single or double brushed, and pile height if it matters.
  • Width: open width or tubular, which affects cutting efficiency.
  • Colours: Pantone TCX references or a PFD (prepared-for-dye) base for garment dyeing.
  • Performance targets: shrinkage, pilling grade and colour fastness.

Our hoodie fleece GSM guide helps you choose weight, and our fleece vs French terry buyer guide helps you choose the construction.

Prefer one partner for fabric and garments? Weavnora sources heavyweight cotton fleece for hoodie, sweatshirt and sweatpants programs and approves fabric with you before cutting. See our fleece fabric page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Step 2: Decide what kind of supplier you need

There are three main routes:

  • Knitting mills: knit, dye and finish fleece. Best control and pricing, but higher fabric minimums per colour.
  • Fabric traders and converters: sell stock or semi-stock fleece from several mills. Lower minimums and faster supply, less control over specs.
  • Full-package garment factories: source fleece from their mill network and deliver finished garments. One point of contact and fabric approval within the garment process.

Which questions should you ask a fleece supplier first?

Early questions save weeks. Ask which fleece qualities they knit or stock, the usual weight range, whether they offer PFD fabric for garment dyeing, the minimum per colour, lead time for new colours, and whether they share test reports. Also ask which garment factories already cut their fleece; that tells you how the fabric behaves in production.

Step 3: Look in the right places

Brands typically find fleece sources through trade fairs, sourcing platforms, textile directories, industry referrals and garment factories they already work with. Ask your garment factory which mills it uses for fleece; it often has negotiated prices and test history. Our guide on how to find a hoodie manufacturer shows how fabric and garment sourcing connect.

Step 4: Request swatches and header cards

Ask shortlisted suppliers for swatches or header cards of fleece close to your spec. Most suppliers can send swatches within 5-10 days. Check weight with a GSM cutter, feel the face and back, stretch the fabric and look at the brushing evenly across the swatch. Compare swatches side by side under the same light.

Step 5: Test the fabric

Hand feel is not enough. Request or run tests for:

  • Weight: confirm GSM before and after washing.
  • Shrinkage: after home washing, often targeting within 3-5% length and width as a typical industry estimate.
  • Pilling: face fabric rated on a 1-5 scale, with many buyers targeting grade 3-4 or better.
  • Colour fastness: to washing and rubbing, especially for dark colours.
  • Spirality or torque: twist after washing that makes side seams move.

Our guide to apparel fabric pilling test acceptance explains how to read pilling results.

Step 6: Compare quotes on equal terms

Fleece is often priced per kilogram, while garments are priced per piece. Ask each supplier for price per kg, fabric width, GSM, minimum per colour, lead time for greige and dyed fabric, and test reports. Convert price per kg to cost per garment using your fabric consumption. Our fleece fabric price per kg guide shows how to do that conversion.

Mill vs trader vs full-package factory: what are the trade-offs?

Selection criteriaKnitting millFabric traderFull-package factory
Spec controlHighestLow to mediumHigh through factory
Minimum per colourHighestLowestLinked to garment order
Lead timeLonger, knit and dyeFastest from stockPlanned with garment
Price per kgLowest at volumeHigherBuilt into garment price
Who handles testingMill, on requestVariesFactory and mill
Best forLarge, repeat programsSmall or urgent runsBrands wanting one partner

The trade-offs are control and price versus flexibility and simplicity. Going direct to a mill gives the best price and spec control at volume, but you must manage fabric delivery to your garment factory. Traders are flexible for small runs but offer less consistency. A full-package factory simplifies coordination and puts fabric and garment responsibility in one place.

Step 7: Approve a sample length and set bulk rules

Before bulk, order a sample length or let your garment factory make samples from the exact fabric quality. Approve a fabric standard with weight range, colour, shrinkage and pilling results. Ask for lot information on bulk rolls and a test report per dye lot. Red flags include unwillingness to share test results, large swings in GSM between swatches and bulk, and no clear answer on colour lot control. For the full sourcing journey, read our how to find a clothing manufacturer guide.

How to find a fleece fabric supplier: typical specs and key numbers

SpecTypical estimate range
Fleece weight range for hoodies and sweats280-450 GSM
Weight tolerance to write into the spec3-5%
Swatch delivery time5-10 days
Shrinkage target after home wash3-5%
Pilling target on 1-5 scaleGrade 3-4 or better
Bulk dyed fabric lead time20-35 days, typical industry estimate
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • Start with a written fleece spec: fibre, construction, GSM range, brushing, width, colours and test targets.
  • Choose between mills, traders and full-package factories based on volume and control.
  • Request swatches, then test weight, shrinkage, pilling and colour fastness before committing.
  • Compare quotes per kg and convert to cost per garment with your fabric consumption.
  • Approve a fabric standard and ask for lot test reports in bulk.

Request a how to find a fleece fabric supplier quote

Ready to discuss fleece for your next program? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

Where can I find fleece fabric suppliers?

Common routes include trade fairs, sourcing platforms, textile directories, industry referrals and the mill network of your garment factory.

What GSM fleece is best for hoodies?

Many hoodies use 330-400 GSM. Lighter 280-320 GSM suits layering, and 400-450 GSM gives a very heavy feel.

Should I buy fleece from a mill or a trader?

Mills offer better price and spec control at volume; traders offer lower minimums and faster supply for small runs.

What tests should I ask for on fleece fabric?

Ask for weight, shrinkage, pilling, colour fastness to washing and rubbing, and spirality after washing.

Is there a minimum order for fleece fabric?

Yes, fabric minimums usually apply per colour. MOQ depends on style and fabric, so confirm it in your quote.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.