oem-odm · B2B PROCUREMENT
Hood Eyelets Hoodie Manufacturer: Size, Finish, QC
By Weavnora · Updated

Direct answer
What buyers need to know
Hood eyelets hoodie manufacturer programs set metal or plastic eyelets in the hood face so the drawcord runs cleanly without fraying the fleece. Most styles use 300-500 GSM fleece, 5-8 mm inner eyelet openings, 2-3 sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
Hood eyelets hoodie manufacturer programs set metal or plastic eyelets in the hood face so the drawcord runs cleanly without fraying the fleece. Most styles use 300-500 GSM fleece, 5-8 mm inner eyelet openings, 2-3 sample rounds of 7-15 days and 30-45 days for bulk. MOQ depends on style and fabric.
Hood eyelets look like a tiny hardware choice until one pulls out in the wash or scratches the wearer's face. The right eyelet lets the cord slide, protects the fleece cut edge and finishes the hood with a deliberate metal or tonal accent. The wrong size frays the hole, rattles loosely or oxidises onto a light body. This guide explains what a hood eyelets hoodie manufacturer controls, how to match eyelet to cord and fleece, and how to write placement into a tech pack before bulk.
What is a hood eyelets hoodie manufacturer?
A hood eyelets hoodie manufacturer is a cut-and-sew factory that installs metal or plastic eyelets at the hoodie face opening so the drawcord can pass through without cutting the fleece. Typical programs use 300-500 GSM fleece with 5-8 mm inner openings, set in pairs with even spacing, then wash-test for pull-out and finish wear. As a typical industry estimate, plan 2-3 sample rounds of 7-15 days each to lock eyelet size, finish and placement before bulk.
Why do hood eyelets matter on heavyweight hoodies?
Without eyelets, a drawcord saws against a raw or stitched hole and the fleece pills or tears. Eyelets reinforce that point and give a cleaner product photo. On 300-500 GSM fleece the fabric is thick enough that a poorly set eyelet can sit proud or crush the knit. Brands also use eyelet finish as a design cue: gunmetal on black, antique brass on neutrals, or matching painted eyelets for a soft look. Our custom hoodie sweatshirt manufacturing guide covers how hardware sits in the full build.
Want clean hood eyelets? Weavnora builds heavyweight hoodies and can confirm eyelet size, metal finish and cord pairing on a sample before bulk. Hardware is proven on your fleece weight rather than assumed from a stock blank. See our heavyweight hoodies page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
How are hood eyelets specified and set?
Key fields for the tech pack:
- Inner diameter. Usually 5-8 mm to match cord width.
- Outer flange size. Large enough to grip thick fleece without looking oversized.
- Material and finish. Brass, steel, aluminium or plastic; nickel, gunmetal, antique or painted.
- Placement. Distance from hood edge and spacing between the pair, often 2-4 cm from the face edge.
- Backing. Whether a small fabric or fusible reinforcement sits behind the set.
Setting uses a press with the correct die for the eyelet size. Too much pressure marks the fleece; too little lets the eyelet spin or pull out. Our 100% cotton hoodie manufacturer guide notes cotton fleece behaviour around hardware after washing.
Which fleece weights and eyelet sizes work together?
| Hoodie type | Typical GSM | Typical inner opening |
|---|---|---|
| Midweight everyday hoodie | 280-350 GSM | 5-6 mm |
| Heavyweight streetwear hoodie | 350-450 GSM | 6-7 mm |
| Extra heavy statement hoodie | 450-500 GSM | 6-8 mm |
| Washed or acid wash hoodie | 300-420 GSM | 6-7 mm, corrosion-aware finish |
Most programs land on 300-500 GSM with a 5-8 mm opening matched to a 5-8 mm cord. See our 350 GSM hoodie manufacturer guide and 400 GSM hoodie manufacturer notes.
Metal eyelets vs plastic eyelets: which option fits?
Both reinforce the cord hole. Choose based on handfeel, look and wash exposure.
| Selection criteria | Metal hood eyelets | Plastic hood eyelets |
|---|---|---|
| Look | Premium hardware accent | Soft, low-shine |
| Durability | High if finish is sound | Good; can crack under abuse |
| Corrosion risk | Possible on harsh washes | Low |
| Face comfort | Can feel cool or hard | Softer against skin |
| Colour options | Plated finishes | Moulded colours |
| Best use | Streetwear, heavyweight cores | Soft lifestyle, kids-leaning adults |
The trade-offs are a stronger hardware story and long wear against a softer, quieter finish with less corrosion risk. Many brands use metal on core heavyweights and plastic on washed pastel programs. Our acid wash hoodie manufacturer overview flags finish choice when chemical washes are involved.
How do you stop pull-out, marks and uneven pairs?
- Match inner diameter to cord so the cord slides without forcing.
- Reinforce thick fleece if the knit collapses under the die.
- Keep left and right eyelets within about 0.3-0.5 cm for height and edge distance.
- Wash-test 3-5 times for pull-out, finish wear and marks on light fleece.
- Avoid stacking eyelets too close to seam bulk at the hood join.
- Plan cotton fleece shrinkage of about 3-5% before setting final placement on washed programs; sometimes eyelets are set after wash.
Our 2x2 rib cuff recovery stretch test guide helps when rib and hood approvals share a sample. For face fabric planning see the 220 GSM hoodie face fabric buyer guide.
What should a sample and QC plan include?
- Eyelet and cord pairing samples on the real fleece.
- Hood sample with placement measured from the face edge.
- Wash and pull test for security and finish.
- Size set check so spacing grades cleanly.
- Pre-production sample sealed as the bulk standard.
Each round typically takes 7-15 days, and most programs approve in 2-3 rounds. Our blank heavyweight hoodies wholesale guide is useful if you start from blanks then specify hardware.
What do you send for an accurate quote?
- A reference hoodie or tech pack with eyelet size, finish and placement.
- Target GSM band and cord type.
- Whether the hoodie is piece dyed, garment dyed or washed.
- Decorations, size and placement.
- Quantities by colour and size and your delivery window.
Related reading: 300 GSM hoodie manufacturer guide and 500 GSM hoodie manufacturer guide. Weavnora makes heavyweight hoodies, sweatshirts, tees, sweatpants and related merch; we do not make waterproof technical outerwear.
Hood eyelets hoodie manufacturer: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Hoodie fabric weight | 300-500 GSM |
| Eyelet inner opening | 5-8 mm |
| Placement from hood edge | 2-4 cm |
| Pair height tolerance | 0.3-0.5 cm |
| Sample lead time per round | 7-15 days |
| Bulk production after approval | 30-45 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- A hood eyelets hoodie manufacturer installs metal or plastic eyelets so the drawcord runs without fraying the fleece.
- Typical inner openings are 5-8 mm on 300-500 GSM fleece, matched to cord width.
- Keep left-right placement within about 0.3-0.5 cm and wash-test for pull-out.
- Metal reads premium; plastic is softer and lower corrosion risk.
- Plan 2-3 sample rounds of 7-15 days and confirm MOQ by style and fabric in the quote.
Request a hood eyelets hoodie manufacturer quote
Ready to sample hood eyelet hoodies? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What are hood eyelets on a hoodie?
They are metal or plastic rings set in the hood face so the drawcord can pass through without cutting the fleece.
What eyelet size should I use?
Most adult programs use about 5-8 mm inner openings matched to the cord width.
Do metal eyelets rust in washed hoodies?
They can if the finish is weak or the wash is harsh. Approve finish on a wash sample, especially for acid wash programs.
Can eyelets be set after garment wash?
Yes. Post-wash setting keeps placement accurate when cotton fleece shrinks about 3-5%.
What is the MOQ for hood eyelet hoodies?
MOQ depends on style, fabric and colours. Send your references and quantities through a quote request.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.