blog · B2B PROCUREMENT

Drawcord Cost per Piece: Hoodie and Sweatpants Drawstrings

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Drawcord cost per piece depends on cord type, material, width, length, tips or aglets, custom colour eyelets and sewing. As a typical estimate, a hoodie uses a 130-150 cm cord and sweatpants a 110-130 cm cord; plain tipped cotton cord is the baseline, while metal aglets and custom colours add cost. MOQ depends on style and fabric.

Drawcord cost per piece depends on cord type, material, width, length, tips or aglets, custom colour eyelets and sewing. As a typical estimate, a hoodie uses a 130-150 cm cord and sweatpants a 110-130 cm cord; plain tipped cotton cord is the baseline, while metal aglets and custom colours add cost. MOQ depends on style and fabric.

The drawcord is one of the smallest parts of a hoodie, yet it is one of the first things a customer touches. A flat heavy cotton cord with metal tips signals premium; a thin shiny cord with a melted end signals budget. The cost difference between those two options per piece is small in absolute terms but adds up across a run, and it is one of the easiest places to upgrade perceived quality. This guide breaks down drawcord cost per piece in relative terms, because actual prices depend on quantity, material and timing, and shows how to choose the right cord for your price point.

What is a drawcord cost per piece?

Drawcord cost per piece is the trim and labour cost a drawstring adds to each hoodie or pair of sweatpants. It includes the cord itself, its tips or aglets, any custom colour or print, the eyelets or buttonholes it passes through and the time to thread and secure it. A hoodie usually takes a 130-150 cm cord of 8-12 mm flat or 5-8 mm round width. As a typical industry estimate, metal aglets and custom-dyed cords cost noticeably more than plain heat-sealed or plastic tips.

What goes into the drawcord line?

ComponentOptionsRelative cost effect
Cord materialCotton, polyester, cotton-polyCotton usually higher
Cord shapeFlat, round, tubularWide flat cords use more yarn
Width5-8 mm round, 8-12 mm flatWider costs more
TipsHeat seal, plastic, silicone dip, metal agletMetal aglets highest
ColourStock or custom-dyedCustom adds set-up
BrandingPlain, printed, woven-inBranding adds set-up

Length matters too: hoodies typically use 130-150 cm, sweatpants 110-130 cm and shorts 90-110 cm.

Want your trim costs broken down? Weavnora makes heavyweight hoodies and sweatpants and itemises drawcords, eyelets, labels and other trims in your quote so you can choose where to spend. See our heavyweight hoodies page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

What are the biggest cost drivers?

  1. Tip type. Metal aglets are the most expensive tip and need crimping; silicone dip and plastic tips are mid; heat sealing is lowest cost but least premium. Our drawcord tip melting consistency guide explains quality checks.
  2. Custom colour. Matching cord colour to fabric means dyeing a lot of cord; small runs carry more set-up per piece.
  3. Material. 100% cotton cords suit garment dye and washed looks; polyester cords hold colour through garment dye and are often cheaper.
  4. Branding. Printed or woven logos on the cord add set-up.
  5. Eyelets. Metal eyelets add a part and a press step; embroidered buttonholes add sewing time.

How do eyelets and sewing change cost?

A drawcord needs a way out of the hood or waistband: metal eyelets, stitched buttonholes or simple openings in the channel. It also needs threading, a centre bar tack to stop it pulling out, and sometimes a knot at each end. These steps are labour, not trim, but they belong in the drawcord decision. Our drawcord channel stitch density guide covers the channel build.

Plain cotton cord vs premium flat cord with metal tips: which option fits?

Selection criteriaPlain round cord, plastic tipsWide flat cord, metal aglets
Relative costLowerHigher
Perceived qualityStandardPremium
Weight on hoodLightHeavier, swings more
Wash riskTip can loosen or frayAglet finish can tarnish in wash
Best useMerch, budget linesHeavyweight retail hoodies

The trade-offs are a premium touch against higher trim cost and some wash considerations. A practical middle ground is a wide flat cotton cord with silicone-dipped tips, which looks upgraded without metal hardware.

What about garment-dyed and washed programs?

If you garment dye, decide whether the cord should dye with the hoodie. Cotton cords take the dye and match the body; polyester cords stay their original colour, which can be used for contrast. Metal aglets and eyelets can discolour in enzyme or stone washes, so ask for washed samples. Our garment dye cost per piece guide covers the dye step itself.

Should you skip the drawcord entirely?

Some brands remove cords to cut trim cost and give a cleaner hood, and many markets restrict cords at the hood and neck of kids clothing. If you skip the cord, the hood pattern has to hold shape on its own. Our how much does it cost to manufacture a hoodie guide explains the full cost stack so you can see trims in context.

How do you lower drawcord cost without looking cheap?

  • Use one cord style across hoodies and sweatpants to build volume.
  • Choose a stock colour close to your fabric, or a neutral contrast like natural or black.
  • Pick silicone dip tips instead of metal aglets on mid-price lines.
  • Skip metal eyelets and use embroidered buttonholes if the look allows.
  • Keep cord length per size group, not per size.

What should you send for a quote?

Send the garment, cord type and width, length, tip style, colour, any branding, eyelet preference and quantities. Ask for two cord options in the quote to see the difference. For the full pricing framework, read the apparel manufacturing cost and pricing guide, and for other trims see our woven label cost per piece guide.

How small is the drawcord in total cost?

In most hoodies the drawcord is a small share of the garment cost, well behind fabric, making and decoration, and usually behind the zipper on zip styles. Because the share is small, upgrading the cord is one of the cheapest ways to lift perceived quality. Many brands keep the fabric and making unchanged and move from a thin round cord to a wide flat cord with better tips, then mention it on the product page as a premium detail.

Drawcord cost per piece: typical specs and key numbers

SpecTypical estimate range
Hoodie drawcord length130-150 cm
Sweatpants drawcord length110-130 cm
Flat cord width8-12 mm
Round cord width5-8 mm
Custom cord colour development7-15 days
Bulk production after approval30-45 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • Drawcord cost per piece covers the cord, tips, colour, branding, eyelets and threading labour.
  • Metal aglets and custom-dyed cords cost the most; heat-sealed plain cords the least.
  • Cotton cords dye with garment-dyed hoodies; polyester cords stay their original colour.
  • A wide flat cotton cord with silicone tips is a strong mid-price upgrade.
  • Standardise one cord across styles to build volume and reduce cost.

Request a drawcord cost per piece quote

Ready to price your hoodie trims? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What drives drawcord cost per piece?

Cord material, shape and width, length, tips or aglets, custom colour, branding and eyelets.

How long is a hoodie drawcord?

Typically 130-150 cm; sweatpants use 110-130 cm.

Are metal aglets worth it?

On premium heavyweight hoodies they add a premium touch; check that the finish survives your wash.

Do drawcords take garment dye?

Cotton cords dye with the garment; polyester cords keep their original colour.

What is the MOQ for custom drawcords?

MOQ depends on style, fabric and colours. Send your references and quantities through a quote request.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.