oem-odm · B2B PROCUREMENT

Double Hood Hoodie Manufacturer: Lined Hood Specs Guide

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Double hood hoodie manufacturer programs build the hood from two full layers of fleece or jersey on a 350-500 GSM hoodie body, so the hood stands up, frames the face and hides seams. Plan 2 fit sample rounds, 10-15 days per sample and 30-45 days for bulk, with MOQ depending on style and fabric.

Double hood hoodie manufacturer programs build the hood from two full layers of fleece or jersey on a 350-500 GSM hoodie body, so the hood stands up, frames the face and hides seams. Plan 2 fit sample rounds, 10-15 days per sample and 30-45 days for bulk, with MOQ depending on style and fabric.

On a premium hoodie, the hood is part of the silhouette. A thin single layer hood collapses flat on the back, while a well-built double hood stands up around the neck, frames the face when worn and looks finished from every angle. That is why double layer hoods are standard on many heavyweight streetwear and premium basics programs. A double hood adds fabric, sewing time and a few new decisions about lining, drawcords and shape. This guide explains how a double hood hoodie manufacturer builds the hood, what to specify and how it compares with other hood options.

What is a double hood hoodie manufacturer?

A double hood hoodie manufacturer is a cut-and-sew factory that makes hoodies with a hood built from two full layers of fabric, an outer shell and a matching or contrasting lining, sewn together at the face opening so no raw seams show inside. The double layer gives the hood more structure and a cleaner look. Most programs use 350-500 GSM fleece or French terry bodies, a 200-300 GSM jersey or self-fabric lining and 2 fit sample rounds.

How is a double layer hood constructed?

A double hood is two complete hoods sewn together:

  1. Outer shell. Cut from the hoodie body fabric, usually in two or three panels.
  2. Lining. Cut from the same fabric, a lighter jersey or a contrast colour, using the same pattern with small adjustments so it sits smoothly inside.
  3. Face opening. The shell and lining are joined at the face edge, turned and topstitched. This seam replaces the single-layer hood's folded hem or binding.
  4. Neck join. Both layers are attached to the neckline together, often with a back-neck tape to cover the seam.

If the hood has a drawcord, eyelets are set in the outer shell before the layers are joined, and the cord runs in a channel between them. Some brands skip the drawcord entirely for a cleaner, minimal look.

Want a structured double layer hood on your hoodie? Weavnora develops heavyweight hoodies with custom hood builds and checks hood shape and height on a washed fit sample before bulk. See our heavyweight hoodies page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.

Which fabrics work for the shell and the lining?

  • Self-lined. Shell and lining in the same 350-500 GSM fleece or French terry. This gives the most structure but makes the hood heavy and warm.
  • Jersey lining. A 200-300 GSM cotton jersey lining with a fleece shell. This keeps the hood soft against the face and controls weight.
  • Contrast lining. A different colour lining for a visible detail at the face opening. Check colourfastness so the lining does not bleed onto the shell in washing.

Body weights and fabric choices are compared in our hoodie fleece GSM guide and French terry vs fleece hoodie fabric.

How do you specify the hood shape?

Hood shape is easy to get wrong because small pattern changes have a big visual effect. Specify these points of measure, each with a tolerance:

  • Hood height from neck seam to crown.
  • Hood width at the widest point, laid flat.
  • Face opening length along the edge.
  • Overlap at the centre front, if the hood crosses over.
  • Number of panels: two-panel hoods are simple, three-panel hoods with a centre strip hold a rounder shape.

Send photos of a hood you like from the front, side and back when worn, not only flat. Our article on hood volume measurement explains how to measure hood shape on a sample.

Double hood vs single hood vs single hood with facing: which option fits?

Selection criteriaDouble layer hoodSingle layer hoodSingle hood with facing
Structure and standHighLowMedium
Inside finishClean, no seamsVisible seamsPartly clean
Fabric and sewing timeHighestLowestMedium
Weight and warmthHighestLowestMedium
Typical usePremium, streetwearBasics, promoMid-range retail

The trade-offs are look versus cost and weight. A double hood gives the best stand and finish, but it uses more fabric and sewing time, and on a very heavy body it can make the whole hoodie feel top-heavy. A single layer hood is lighter and cheaper but folds flat, while a facing is a middle option. For most heavyweight streetwear hoodies, a double hood with a jersey lining is a balanced choice. The 400 GSM hoodie manufacturer guide shows how hood build pairs with heavier bodies.

Which quality checks matter for double hoods?

  • Lining roll. The lining should not roll out past the face edge. Understitching or a set topstitch keeps it inside.
  • Symmetry. Both sides of the hood should match in height and width, and the centre seam should line up with the centre back.
  • Eyelet and cord. Eyelets should be reinforced and the cord should slide freely in the channel without twisting.
  • Wash behaviour. After a 3-5 cycle wash test, check that shell and lining shrink together and the hood does not twist or pucker.
  • Weight balance. Put the hoodie on a form and check it does not pull backward at the neck.

How do you sample a double hood hoodie?

Start from a body block you already like, then change only the hood. The first sample confirms hood pattern, lining fabric and drawcord choice. The second, washed sample in two or three sizes confirms that the hood grades well, because hood height and width should grow slightly with size, not by the full body grade. If you plan decoration on the hood, such as a print on the side panel or an embroidered logo at the back, add it on the second sample so you can check that the lining hides the back of the embroidery. Our hoodie tech pack template and the custom hoodie and sweatshirt manufacturing guide help you document the hood correctly.

Double hood hoodie manufacturer: typical specs and key numbers

SpecTypical estimate range
Hoodie body fabric350-500 GSM fleece or French terry
Hood lining fabric200-300 GSM jersey or self-fabric
Hood panels2-3 panels
Fit sample rounds2 rounds
Sample lead time per round10-15 days
Bulk production after approval30-45 days
MOQ (pcs per style and colour)Depends on style and fabric; confirmed in your quote

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Key takeaways

  • A double hood uses two full fabric layers joined at the face opening for structure and a clean inside.
  • A jersey lining keeps the hood soft and lighter; self-lining gives the most structure.
  • Specify hood height, width, face opening and panel count with tolerances.
  • Wash-test the sample to confirm shell and lining shrink together without twist.
  • Choose a double hood for premium and streetwear lines; a single hood suits lighter basics and promo programs.

Request a double hood hoodie manufacturer quote

Ready to sample a double hood hoodie? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.

Buyer questions

Frequently asked questions

What is a double hood hoodie?

It is a hoodie whose hood is made from two full layers of fabric, an outer shell and a lining, so it holds its shape and has no visible seams inside.

Is a double hood warmer?

Yes. Two layers trap more warmth and add weight, especially when the lining is the same fleece as the body.

Can the hood lining be a different colour?

Yes. A contrast lining is common. The lining fabric should pass a colourfastness check so it does not bleed onto the shell.

Do double hoods need a drawcord?

No. Many premium hoodies skip the drawcord for a cleaner look. If used, the cord runs between the two layers.

What is the MOQ for double hood hoodies?

MOQ depends on style, fabric and colours. Send your tech pack and quantities through a quote request for an exact answer.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.