WNWEAVNORAB2B APPAREL SOURCING · NORTH AMERICA & EUROPEStart RFQ

oem-odm · B2B PROCUREMENT

Custom Bottoms and Sets Manufacturing: Joggers to Tracksuits

By Weavnora · Updated

Apparel production floor supporting Weavnora sourcing guidance
WEAVNORA SOURCING REFERENCE · PROJECT-SPECIFIC REQUIREMENTS APPLY

Direct answer

What buyers need to know

Custom bottoms and sets manufacturing depends on fabric (300–450 GSM fleece or terry), waistband and cuff construction, and colour matching between tops and bottoms cut from one lot. This hub links every Weavnora guide on joggers, sweatpants, french terry shorts, tracksuits and matching sweatsuit sets, with specs, MOQ and sampling advice.

Custom bottoms and sets manufacturing depends on fabric (300–450 GSM fleece or terry), waistband and cuff construction, and colour matching between tops and bottoms cut from one lot. This hub links every Weavnora guide on joggers, sweatpants, french terry shorts, tracksuits and matching sweatsuit sets, with specs, MOQ and sampling advice.

Bottoms and sets are where many brands grow average order value, but they bring new fit points (rise, thigh, inseam) and a new risk: tops and bottoms that do not match. These guides cover both.

How should you use this bottoms and sets hub?

Start with the product you are adding, then read the set-matching guides if you plan to sell tops and bottoms together, and finish with the waistband and construction specs.

What makes bottoms harder than tops?

Bottoms add fit points that tops do not have: rise, seat, thigh, knee, inseam and leg opening. Each one shows up in reviews, and each one changes with fabric weight. A jogger pattern that drapes well in 320 GSM french terry can look stiff in 450 GSM fleece, and garment-dyed bottoms often shrink more in length than in width. That is why fit samples for bottoms should be worn, not just measured, and why wash testing matters more than for a tee.

Waistbands are the second challenge. A waistband that rolls, digs in or loses recovery after a few washes is one of the most common reasons customers return sweatpants. Specify elastic width, casing construction and drawcord attachment, and test the waistband after several home washes before you approve bulk.

What should a bottoms RFQ include?

A complete request lets a factory quote joggers, sweatpants or shorts accurately the first time. Include a flat sketch or reference photo; a measurement chart for one base size covering waist relaxed and extended, rise, thigh, knee, leg opening and inseam; fabric type, weight and composition; waistband construction and elastic width; cuff or hem finish; pocket details; decoration method and position; size range and expected ratio; colours and quantities; labels and packing; and destination and Incoterm. If you plan a set, say so in the RFQ so the factory can plan one fabric lot for tops and bottoms.

How do you plan sets so tops and bottoms match?

Matching sets need colour control across separate pieces. The safest approach is to cut tops and bottoms from the same fabric lot, dye rib trims together with the body fabric where possible, and approve a shade band that shows the acceptable lightest and darkest pieces. When sets are garment-dyed, dye both pieces in the same batch and approve them side by side. Plan the size ratio for tops and bottoms separately, because customers are often not the same size in both.

For first orders, many brands launch one bottom style in two colours that match their bestselling hoodie, then add shorts or a second silhouette once they know their size curve. Ordering tops and bottoms together also helps reach fabric minimums, especially against a program MOQ such as Weavnora's 1,000-piece planning reference.

Which bottoms can you develop?

Product guides for joggers, sweatpants and shorts.

Need numbers for your own program? Tell us the style, GSM, colours and delivery window for your sweatshirts, sweatpants or sets and we will reply with a quotation. Open the quote form or see the sweatshirts and casualwear page.

How do you make matching sets and tracksuits?

Guides on sets, tracksuits and top-to-bottom colour matching.

How do you specify waistbands and construction?

Waistband, elastic, rib and drawcord specs, including QC checkpoints.

Which fabrics and colour controls apply to bottoms and sets?

Fabric and colour-control guides that apply directly to bottoms and matched sets.

Custom bottoms and sets manufacturing: key specs

SpecTypical estimate range
Jogger / sweatpant fleece320–450 GSM
French terry shorts280–340 GSM
Shorts inseam options5–9 in (13–23 cm)
Waistband elastic width3–5 cm
Sampling time per round14–28 days
Bulk lead time30–60 days
Weavnora program MOQ reference1,000 pcs per program

These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.

Which other Weavnora hubs should you read?

Key takeaways

  • Choose fabric weight for the silhouette.
  • Cut set pieces from one fabric lot.
  • Specify waistband width and cuff recovery.
  • Wash-test bottoms before bulk.

Request a quote

Ready to move from research to a real project? Send your product brief, target quantity and destination through the Weavnora contact page and our team will reply with a quotation and sampling plan. You can also browse the full capability catalog.

Buyer questions

Frequently asked questions

What GSM is best for joggers?

Most streetwear joggers use about 320–420 GSM fleece or terry.

How do I make sure a set matches?

Cut tops and bottoms from the same fabric lot and approve a shade band.

Cuffed or open-hem sweatpants?

Both sell; many brands offer both from one fabric order.

Do bottoms shrink more than tops?

Washed bottoms often shrink more in length; test before bulk.

Should sets be one SKU or separates?

Separates reduce size returns; one SKU simplifies inventory.

Start a sourcing conversation

Share quantity, target GSM, destination and sample requirements.

Start your RFQ →

Email files to postmaster@weavnora.com.