oem-odm · B2B PROCUREMENT
Brushed Fleece Hoodie Manufacturer: Brushing, GSM and QC
By Weavnora · Updated

Direct answer
What buyers need to know
Brushed fleece hoodie manufacturer programs knit three-thread fleece, then brush the inside loops into a soft pile, usually at 300-450 GSM. Plan 1-2 fabric approvals, 2-3 sample rounds, 10-15 days per sample and 30-45 days for bulk, with MOQ depending on style and fabric.
Brushed fleece hoodie manufacturer programs knit three-thread fleece, then brush the inside loops into a soft pile, usually at 300-450 GSM. Plan 1-2 fabric approvals, 2-3 sample rounds, 10-15 days per sample and 30-45 days for bulk, with MOQ depending on style and fabric.
Ask most customers what a good hoodie feels like and they describe brushed fleece: a smooth outer face, a soft fuzzy inside and real warmth. Behind that feel are several technical choices, from yarn and knit to how hard the fabric is brushed. Get them wrong and the hoodie pills, sheds or shrinks after a few washes. This guide breaks the topic into the specs you control, then compares brushed fleece with other hoodie fabrics.
What is a brushed fleece hoodie manufacturer?
A brushed fleece hoodie manufacturer is a garment factory that makes hoodies from fleece fabric whose inside loops have been raised by wire brushes into a soft, fuzzy pile. The pile traps air for warmth and gives the classic cosy hoodie feel. Most programs use cotton or cotton-polyester three-thread fleece of 300-450 GSM, with single or double brushing, and 2-3 sample rounds.
How is brushed fleece made?
Hoodie fleece is usually a three-thread knit. A face yarn forms the smooth outside, a tie yarn holds the structure and a thicker loop yarn sits on the back. After knitting and dyeing, the fabric passes through a raising machine with rotating wire-covered rollers. These pull fibres out of the back loops and create the soft pile.
- Single brushed: the back is raised once, leaving a light, even pile.
- Double brushed: the back is raised more, giving a deeper, softer pile. Some mills also lightly brush or shear the face.
More brushing makes the fabric softer and warmer, but it can weaken the loops and increase pilling and shedding if overdone. Our article on fleece brush height consistency QC explains how to check brushing from roll to roll.
Sourcing soft heavyweight hoodies? Weavnora makes brushed fleece hoodies in heavyweight cotton fleece and approves brushing, weight and fit on samples before bulk. See our heavyweight hoodies page for the base styles and fabrics we work with, then request a quote with your style, fabric and quantities. MOQ depends on style and fabric, so we confirm it in your quote.
Which fibre content should you choose?
- 100% cotton fleece: natural hand, breathable, takes garment dye and washes well, but shrinks more and can pill if loop yarn is low quality.
- Cotton-rich blends, such as 80/20 cotton-polyester: more stable, less shrinkage, often less pilling and a fuller pile.
- Cotton face with polyester back: a cotton outer for printing and a polyester loop for a soft, durable pile.
For vintage washed or garment-dyed hoodies, 100% cotton is usually required, because polyester does not take the dye. Our garment dye specification for fleece hoodies covers that route.
What weight should a brushed fleece hoodie be?
Weight drives warmth, drape and price. As a general guide:
- 300-340 GSM: midweight, comfortable for most climates and layering.
- 350-400 GSM: heavyweight, structured, popular with streetwear brands.
- 400-450 GSM: very heavy, dense and boxy, with longer drying and wash times.
Weight is measured after finishing, and brushing changes thickness more than weight. Two fabrics at the same GSM can feel different depending on brushing and yarn. Our hoodie fleece GSM guide goes deeper on weight choices.
Brushed fleece vs French terry vs polar fleece: what are the trade-offs?
| Selection criteria | Brushed cotton fleece | French terry | Polar fleece |
|---|---|---|---|
| Inside surface | Soft brushed pile | Visible loops | Brushed on both sides |
| Warmth | High | Medium | High |
| Breathability | Medium | High | Lower |
| Garment dye and wash | Good with cotton | Very good | Not suitable |
| Pilling risk | Medium | Low | Medium to high |
| Best for | Classic warm hoodies | Year-round, washed looks | Outdoor, technical layers |
The trade-offs are warmth and softness versus breathability and durability. Brushed fleece gives the most familiar hoodie feel, but brushing adds pilling risk. French terry is lighter and suits washed or year-round styles. Polar fleece is warm but is a different polyester fabric and does not suit garment-dyed or vintage looks. Our fleece vs French terry buyer guide compares the first two in more depth.
How do you control pilling and shedding?
Pilling depends on yarn quality, fibre length, knit tightness and brushing intensity. Ask the mill for:
- Combed or ring-spun yarn on the face if you want a smooth print surface.
- A pilling test result on the face fabric, typically targeting grade 3-4 or better on a 1-5 scale, as a common buyer benchmark.
- A wash test of 3-5 home cycles to check pile matting and shedding.
Our guide to fleece pilling grade for hoodie programs explains test methods and how to write the target into your brief.
How do you control shrinkage?
Brushed cotton fleece can shrink significantly if it is not pre-shrunk. Common targets after washing are within about 3-5% in length and width, as a typical industry estimate. Mills control this with compacting and relaxed drying. If the hoodie will be garment washed, the pattern should be made with an allowance for wash shrinkage, which the factory confirms after a wash test on the fabric.
Which hoodie details suit brushed fleece?
Brushed fleece works with almost every hoodie construction, but a few details make the most of it. Heavy 2x2 or 1x1 rib cuffs and waistbands in matching cotton rib keep the silhouette clean. A double-layer hood, with brushed fleece on both sides, feels softer around the face and holds its shape better than a single-layer hood. Flat drawcords and metal or matte eyelets suit premium programs, while cord-free hoods suit minimal styles. Kangaroo pockets should be cut from the same roll as the body to avoid shade differences. If you print on the hoodie, the smooth face takes screen prints well, but heavy brushing can push fibres through light prints, so approve a printed sample on the bulk fabric. Our rib knit fabric page lists common rib options.
What should your brief include?
Send fibre content, target GSM range, single or double brushing, colour references, face yarn type, pilling and shrinkage targets, fit reference or size chart, rib details for cuffs and waistband, and any print or embroidery. Ask for fabric hand swatches before the first sample. For the full development flow, see our custom hoodie and sweatshirt manufacturing guide.
Brushed fleece hoodie manufacturer: typical specs and key numbers
| Spec | Typical estimate range |
|---|---|
| Fleece weight | 300-450 GSM |
| Fabric approval rounds | 1-2 rounds |
| Sample rounds | 2-3 rounds |
| Lead time per sample round | 10-15 days |
| Shrinkage target after wash | 3-5% |
| Bulk production after approval | 30-45 days |
| MOQ (pcs per style and colour) | Depends on style and fabric; confirmed in your quote |
These are typical industry estimate ranges for planning, not quotes; confirm actual figures with your supplier for your fabric, quantity and destination.
Key takeaways
- Brushed fleece is a three-thread knit whose back loops are raised into a soft pile.
- Double brushing feels softer but can increase pilling; check brushing consistency between rolls.
- Choose 100% cotton for garment dye and vintage washes, cotton-rich blends for stability.
- 350-400 GSM is the most common heavyweight streetwear range.
- Write pilling, shrinkage and weight targets into the brief and approve them on samples.
Request a brushed fleece hoodie manufacturer quote
Ready to sample a brushed fleece hoodie? Send your tech pack or reference images, fabric preference, colours and quantities through our quote request form. MOQ depends on style and fabric, so we confirm it in your quote together with sampling time, approval steps and an itemised price.
Buyer questions
Frequently asked questions
What is brushed fleece?
It is a knit fabric, usually three-thread fleece, whose inside loops are brushed with wire rollers to create a soft, warm pile.
Is double brushed fleece better?
It feels softer and warmer, but heavier brushing can increase pilling and shedding. The right choice depends on your quality target and price point.
Does brushed fleece pill?
All brushed fleece can pill to some degree. Good yarn, a tight knit and controlled brushing reduce it, and a pilling test confirms the level.
What GSM is a good brushed fleece hoodie?
Many streetwear hoodies use 350-400 GSM. Lighter 300-340 GSM suits layering, and 400-450 GSM gives a very heavy, boxy feel.
What is the MOQ for brushed fleece hoodies?
MOQ depends on style, fabric and colours. Send your design and quantities through a quote request for an exact answer.
Start a sourcing conversation
Share quantity, target GSM, destination and sample requirements.
Start your RFQ →Email files to postmaster@weavnora.com.